what did santa bring?

[mick70Participant @mick70]

[mick70Participant @mick70]

what did santa bring you?

i got an ER11 chuck and collets from Arc

a dividing head from warco

and my boy as ordered me some WSP books but left it late so not arrived yet.

[Michael GilliganParticipant @michaelgilligan61133]

Some Radiolarian 'chalk' from the Barbados deposits [see my 3D Graphing thread] from which I will, in due course, extract many, many, individual specimens.

On the subject of the very small … here is a snowman: **LINK**

http://www.huffingtonpost.co.uk/entry/meet-the-worlds-smallest-snowman_uk_585ba0dee4b0f24da6e6be37?

MichaelG.

[John RuddParticipant @johnrudd16576]

Well I must admit to cheating a little….

2 weeks ago I popped into Arc and bought 2 dro's and scales for my 626 mill and 11-27 lathe and a set of ripper end mills, as a present for me from me…..but I also added a couple of tool holders and a drill chuck arbor….

The in- laws gave me some cash which was duly spent on a selection of centre drills while I was there…'Er -indoors' wrapped them up and placed under the tree…..

So quite a good Christmas for me in terms of tooling…

[martin perman 1Participant @martinperman1]

Sadly for me Christmas has been cancelled in our house I've got severe stomach pain and S & D since early yesterday morning, the rest of my family have gone to my Brothers to leave me suffering in silence.

Martin P

[Michael GilliganParticipant @michaelgilligan61133]

Hard luck, Martin

Get Well Soon

[pgk pgkParticipant @pgkpgk17461]

The Spirit of Christmas – a wonderful thrill
the Grandkids excited and joyously shrill.
And under the tree
even something for me
Yes, Santa had left me his bill.

[HacksawParticipant @hacksaw]

Just as well i bought M.E, M.E.W , and Motorsport magazines, in Smiths yesterday , as i only got socks and slippers….

[Neil WyattModerator @neilwyatt]

Amongst other things a very posh rucsack/camera bag, a 'Wallet Ninja', a book of 'Trumpisms' and a painting by my brother  The greens have been sucked out by the lighting a bit.

 

Edited By Neil Wyatt on 25/12/2016 16:26:49

[Rik ShawParticipant @rikshaw]

"The greens have been sucked out by the lighting a bit" ——- No Brussels with the turkey then?

[mechman48Participant @mechman48]

Santa has been nice this year… Keats angle plate, external threading tool with 60* tip + 55* tip, – RDG tools… 4 piece set small hole gauges, set of 4 diamond mini stones, 1/2" machine reamer, – Arc Euro…. usual disclaimers.

George.

Edited By mechman48 on 25/12/2016 19:14:05

[NJHParticipant @njh]

DRO for the lathe – (as planned!) – fitting starts tomorrow ( I hope !)

Norman

[Neil WyattModerator @neilwyatt]

Posted by Rik Shaw on 25/12/2016 16:39:30:

"The greens have been sucked out by the lighting a bit" ——- No Brussels with the turkey then?

"What will Christmas be like post-Brexit?"

"No Brussels!"

[nigel jones 5Participant @nigeljones5]

The early present of Chinese DRO fully fitted and a Haynes manual on Rocket for me. I do like the idea of no Brussels, hate the sodding things!

[Gray62Participant @gray62]

A Hemingway kits 'Dynamic tool post grinder'. I may even do a build thread on this one

I ordered this a bit late but just had an email today from Kirk to say it will be with be before the end of the week. As always, Kirk goes out of his way with customer service, big plus for Hemingway 

I will be deviating from the suggested construction methods originally used as all of the milling operations were done on a Myford lathe, I will be doing these on My Ajax turret mill

Edited By Graeme W on 25/12/2016 21:18:39

[BazyleParticipant @bazyle]

I got a surprise trowel. This one from Axminster It is more like a Crocodile Dundee knife. Although dished like a trowel it is super sharp one side and serrated ad sharp the other. I'm sure HSE will ban them soon.

The people who invited me to xmas dinner also gave me take-away for tomorrow's EDMES track session.

[peak4Participant @peak4]

Posted by fizzy on 25/12/2016 20:39:39:

The early present of Chinese DRO fully fitted and a Haynes manual on Rocket for me. I do like the idea of no Brussels, hate the sodding things!

I was never keen on them boiled, but; halved and fried with shallots and pomegranate seeds, with a drop of white wine, pepper and nutmeg, shed a whole different light on greens.

[Ian PrudenteParticipant @ianprudente26813]

Wohoo! I got my first lathe at last ! It's an axminster diet c2a 300w (second hand)

I haven't used a lathe since I was in college 25 years ago so I've got some learning and refreshing to do

All I wanted was one of those fancy spinning tops that spinfinity do, but after my oh saw the price she thought it would be better to get me a lathe to make my own !!

So, does anyone know any books or instructions of some sort as to how I go about making one? I think I have a lot of learning to do ahead of me, going to order a 6" 50mm ria chunk of copper bar and see how I get on (has anyone on here made one before??)

Ian

[JasonBModerator @jasonb]

Welcome to the forum Ian, can I suggest you start a new thread on making the top as it may get lost within this one.

Jason

PS Copper is a pig to turn, if you want that sort of colour than look at Bronze.

[Chris Evans 6Participant @chrisevans6]

Free cutting copper is available, I think it has sulphur added. When I was working we used it for electrode making for our spark erosion machines. Here in the midlands it is available from the EDM (spark erosion) suppliers. Erodex and Graphite Technologies are two I can remember buying from.

[Involute CurveParticipant @involutecurve]

Lots of callipers! Mitutoyo 150mm Caliper, and a pair of Monoblock Brembo's for the Bike…. well happy….

[jaCK HobsonParticipant @jackhobson50760]

Spoilt: Flir tg130

No use for it. Just an amazing toy. Almost as good was the ever-spinning top (for about 1/100th of the price).

 

Edited By jaCK Hobson on 26/12/2016 11:37:19

Edited By jaCK Hobson on 26/12/2016 11:38:04

[LathejackParticipant @lathejack]

I never get anything engineering related from Santa, just the usual socks, T shirts and those awful foreign soft centred chocolates.

So this Christmas I treated myself to a new hydraulic bike lift, plus yet another BSA motorcycle to go on top of it.

And a New Years resolution is to try and finaly get that Red Wing engine in the background finished.

[AjohnwParticipant @ajohnw51620]

As it turns out I bought myself a 3 in 1 welder. My wife bought me compressor to go with it and for other things and my son bought me a drone I have wanted for some time. The order was messed up so transmitter arrived but the drone will come latter. Then bits and bobs. Socks, some chocolate that will last rather a long time and an XL Nike sweat shirt. Bit baggy in a couple of places but will probably be ok when washed. Their xl's usually are.

John

–

[Neil WyattModerator @neilwyatt]

Posted by peak4 on 25/12/2016 22:41:29:

Posted by fizzy on 25/12/2016 20:39:39:

The early present of Chinese DRO fully fitted and a Haynes manual on Rocket for me. I do like the idea of no Brussels, hate the sodding things!

I was never keen on them boiled, but; halved and fried with shallots and pomegranate seeds, with a drop of white wine, pepper and nutmeg, shed a whole different light on greens.

A percentage of folks are very sensitive to a chemical produced when sprouts and cabbage are well cooked.

I love raw cabbage or stir-fried cabbage and am happy to eat broccoli raw or cooked, but even the thought of cooked sprouts or boiled cabbage makes me feel queasy. I guess Fizzy and I share the sprout-intolerance

Neil

[Author]

Posts