Vertex (V4?) Rotary Table

[Michael GilliganParticipant @michaelgilligan61133]

Largely irrelevant, in respect of the ‘seconds’ precision to the job in hand.

MichaelG.

[Nicholas FarrParticipant @nicholasfarr14254]

Mi MichaelG, largely irrelevant, but the O/P did ask how to set about his problem with his minutes and seconds, and maybe now he can understand that chasing a few seconds on the set up he has, is somewhat futile.

Regards Nick.

[Howard LewisParticipant @howardlewis46836]

Am I the only one to think that after all our discussions the OP is going to use Division Plates on his Rotary Table to produce the required 19 and 20 divisions (as the original coupling )?

Howard

[Michael GilliganParticipant @michaelgilligan61133]

I’m frequently ‘judged’ by the people who think mentioning ‘Angels on pins’ is clever … so I thought I should be the one to mention that most of this discussion was irrelevant to Martyn’s actual requirement [as opposed to his perceived one].

Ho Hum

MichaelG.

[Jon LawesParticipant @jonlawes51698]

Back when I went to the pub most of the conversations were irrelevant, but still very enjoyable and often enlightening.

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Howard Lewis on 22/01/2021 14:49:21:

Am I the only one to think that after all our discussions the OP is going to use Division Plates on his Rotary Table to produce the required 19 and 20 divisions (as the original coupling )?

Howard

.

Does Martyn have any Division Plates, Howard ?

… I don’t recall him mentioning them.

[ which is why I provided one for him to print ]

MichaelG.

Edited By Michael Gilligan on 22/01/2021 14:57:54

[Howard LewisParticipant @howardlewis46836]

A kind thought Michael.

Martyn will be able to choose between D P s, if he has them, and 18 degree intervals for one side and your template for the other.

Howard

[Author]

Posts