uploading images

uploading images

This topic has 3 replies, 3 voices, and was last updated 16 February 2015 at 22:08 by Neil Wyatt.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
16 February 2015 at 21:53 #32451
Michael Foden
Participant
@michaelfoden39595
Advert

16 February 2015 at 21:53 #180029
Michael Foden
Participant
@michaelfoden39595
I have several images of completed work both on Flickr, & in my picture folders, but cannot work out how to upload them to the Forum.

I'm sure there must be an easy solution.

Many thanks,

Mike.
16 February 2015 at 22:08 #180030
Michael Gilligan
Participant
@michaelgilligan61133
Mike,

Try looking at the first thread on this list of FAQs.

MichaelG.
16 February 2015 at 22:08 #180031
Neil Wyatt
Moderator
@neilwyatt
Hello Michael,

Look HERE under the website FAQs section.

Neil
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Not a dial indicator!
  Started by: Sonic Escape in: The Tea Room
- 5
- 5
- 17 April 2025 at 05:06
  Michael Gilligan
- Source of 8mm Dia flexible stainless steel tubing
  Started by: Greensands in: Materials
- 6
- 6
- 17 April 2025 at 02:57
  Pete
- Acceptable feed screw backlash
  Started by: david newman 9 in: Hints And Tips for model engineers
- 10
- 11
- 17 April 2025 at 02:31
  Pete
- Metric Thread Cutting Without Conversion Wheel
  Started by: Nigel Graham 2 in: Hints And Tips for model engineers
- 5
- 7
- 16 April 2025 at 23:18
  halfnut
- Colchester Chipmaster tailstock shimming
  Started by: Peter_H in: Manual machine tools
- 3
- 3
- 16 April 2025 at 23:15
  halfnut
- What Did You Do Today 2025 1 2 3 4
  Started by: JasonB in: The Tea Room
- 25
- 82
- 16 April 2025 at 22:50
  Nigel Graham 2
- ME No155 Vol10 pg 359 of 1904
  Started by: JasonB in: Stationary engines
- 3
- 4
- 16 April 2025 at 22:20
  Nigel Graham 2
- Stuart Twin Victoria (Princess Royal) Mill Engine 1 2 … 48 49
  Started by: Dr_GMJN in: Work In Progress and completed items
- 32
- 1,218
- 16 April 2025 at 22:14
  Michael Gilligan
- Hitachi SJ300 VFD problem
  Started by: Clive Steer in: Electronics in the Workshop
- 1
- 1
- 16 April 2025 at 22:02
  Clive Steer
- Index cutter for flycutter
  Started by: petro1head in: General Questions
- 3
- 4
- 16 April 2025 at 18:45
  Vic
- Myford Super 7 questions 1 2
  Started by: davp1971 in: Help and Assistance! (Offered or Wanted)
- 16
- 29
- 16 April 2025 at 17:48
  davp1971
- High tensile M6 bolts
  Started by: nevillet in: Materials
- 12
- 20
- 16 April 2025 at 17:20
  old mart
- New ELS-fitted Lathes from Amadeal
  Started by: Neil Wyatt in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 12
- 23
- 16 April 2025 at 17:15
  David Senior
- 1800 Mechanical Movements …
  Started by: Michael Gilligan in: Books
- 7
- 8
- 16 April 2025 at 15:24
  Harry Wilkes
- Unknown Beam Engine
  Started by: Jeff Swinburn in: Stationary engines
- 2
- 3
- 16 April 2025 at 14:31
  Jeff Swinburn
- Greenwood Tools Information Sheet
  Started by: ron61630 in: Help and Assistance! (Offered or Wanted)
- 5
- 5
- 16 April 2025 at 12:43
  Trevor Drabble 1
- Shop Tips
  Started by: Vic in: The Tea Room
- 3
- 5
- 16 April 2025 at 12:31
  Michael Gilligan
- Abrasive tape/paper recommendations please
  Started by: Richard Evans 2 in: General Questions
- 7
- 11
- 16 April 2025 at 09:12
  Richard Evans 2
- Air source heat pumps 1 2
  Started by: Plasma in: The Tea Room
- 22
- 47
- 16 April 2025 at 08:55
  Plasma
- Pipe Unions, Fittings, Standard Dimensions, CAD
  Started by: MEinThailand in: CAD – Technical drawing & design
- 8
- 14
- 16 April 2025 at 08:31
  MEinThailand
- Half Scale 1/4HP A J Weed Engine
  Started by: JasonB in: Stationary engines
- 4
- 15
- 16 April 2025 at 06:46
  Diogenes
- Generator size for vfd controlled 3 phase 5.5 kw motor 1 2
  Started by: PutneyChap in: Electronics in the Workshop
- 10
- 32
- 15 April 2025 at 22:55
  Stuart Smith 5
- Building Bernard Tekippe’s Precision Regulator
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 8
- 17
- 15 April 2025 at 16:49
  Chris Raynerd 2
- Amadeal VM25L Uneven Motor Brush Wear
  Started by: Richard Kirkman 1 in: Help and Assistance! (Offered or Wanted)
- 6
- 11
- 15 April 2025 at 13:03
  Richard Kirkman 1
- 1965 Colchester Chipmaster
  Started by: andyplant in: Introduce Yourself – New members start here!
- 4
- 7
- 15 April 2025 at 11:01
  Emgee

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies