tony hills dividing device

tony hills dividing device

This topic has 4 replies, 2 voices, and was last updated 27 May 2016 at 17:56 by peter ravenscroft.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
26 May 2016 at 17:05 #240413
peter ravenscroft
Participant
@peterravenscroft57700
hi

can anyone tell me where the downloadable files are for the Tony hills dividing device are as is in the latest edition of model engineer workshop as i can not locate them

regards

peter
Advert

26 May 2016 at 17:05 #31838
peter ravenscroft
Participant
@peterravenscroft57700
data files
26 May 2016 at 19:00 #240426
Neil Wyatt
Moderator
@neilwyatt
Things went a bit chaotic around the time the last issue went to press and it slipped my mind. This thread seems as good a place as any to put the links:

http://www.model-engineer.co.uk/wp-content/uploads/sites/4/documents/division2_25.pdf

http://www.model-engineer.co.uk/wp-content/uploads/sites/4/documents/division26_40.pdf

http://www.model-engineer.co.uk/wp-content/uploads/sites/4/documents/division41_50.pdf

Neil
27 May 2016 at 09:02 #240486
Neil Wyatt
Moderator
@neilwyatt
Plus for anyone searching for the encoder, it seems Axminster no longer stock them.

An alternative source is Machine-DRO:

http://www.machine-dro.co.uk/rotary-angle-encoder-and-remote-display-with-a-6mm-diameter-shaft.html

To all intents and purposes they appear to be like a digital angle gauge with the gubbins in a remote box and fixed to a shaft.

Neil
27 May 2016 at 17:56 #240545
peter ravenscroft
Participant
@peterravenscroft57700
many thanks neil

my friend bought one on Sunday at Doncaster but does not have Internet

regards

peter
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Flashing Multiple LEDs at the Same Time
  Started by: James Alford in: Electronics in the Workshop
- 5
- 10
- 15 January 2025 at 12:12
  SillyOldDuffer
- Tool height: Glanze parting tool in Myford S7
  Started by: gabrielb in: Workshop Tools and Tooling
- 10
- 12
- 15 January 2025 at 11:38
  Tony Pratt 1
- Myford Super 7 questions
  Started by: davp1971 in: Help and Assistance! (Offered or Wanted)
- 4
- 8
- 15 January 2025 at 11:18
  JohnF
- Subscriptions – Going Forward 1 2 … 4 5
  Started by: JasonB in: Subscription issues and Digital magazines
- 36
- 117
- 15 January 2025 at 10:48
  SillyOldDuffer
- Refurbishing alloy wheels
  Started by: Mike Crossfield in: The Tea Room
- 8
- 9
- 15 January 2025 at 10:30
  Michael Gilligan
- Had Another Go 1 2 … 6 7
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 19
- 164
- 15 January 2025 at 10:28
  David Jupp
- Harrogate 2025 ??
  Started by: Kevin Hunter in: Exhibitions, Shows and Club Events
- 6
- 6
- 15 January 2025 at 10:08
  Les Riley
- Mobile workshop
  Started by: Sonic Escape in: The Tea Room
- 10
- 16
- 15 January 2025 at 09:52
  bernard towers
- leaded mild steel.
  Started by: mark smith 20 in: Materials
- 5
- 7
- 15 January 2025 at 09:37
  JasonB
- Unkown micrometer manufacturer 1 2
  Started by: Tomk in: Workshop Tools and Tooling
- 15
- 45
- 14 January 2025 at 22:25
  Grindstone Cowboy
- Internal thread & taper in same hole
  Started by: Dell in: Workshop Techniques
- 10
- 24
- 14 January 2025 at 22:18
  Howard Lewis
- Coal 1 2
  Started by: Michael Callaghan in: General Questions
- 22
- 45
- 14 January 2025 at 22:13
  Howard Lewis
- New Member
  Started by: gabrielb in: Introduce Yourself – New members start here!
- 3
- 3
- 14 January 2025 at 21:53
  Howard Lewis
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 7
- 19
- 14 January 2025 at 17:46
  Harry Wilkes
- Fitting chucks to 7 x 12 type baby lathes
  Started by: old mart in: Manual machine tools
- 5
- 9
- 14 January 2025 at 16:40
  old mart
- Bronze round tube
  Started by: jefferybond in: Materials
- 4
- 4
- 14 January 2025 at 16:29
  old mart
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 9 10
  Started by: Neil Wyatt in: Model Engineer.
- 60
- 226
- 14 January 2025 at 15:46
  JasonB
- Weiss 290 Lathe Power Issue
  Started by: thisdesignedthat in: Manual machine tools
- 6
- 12
- 14 January 2025 at 15:05
  thisdesignedthat
- Reilang Oil Can washer?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 6
- 12
- 14 January 2025 at 14:15
  Chris Kaminski
- Francis W Shaw bench planer
  Started by: Rob Gough in: Manual machine tools
- 8
- 22
- 14 January 2025 at 14:08
  Rob Gough
- Editing an STL file
  Started by: Paul L in: CAD – Technical drawing & design
- 9
- 17
- 14 January 2025 at 12:36
  Another JohnS
- Powder coating
  Started by: John MC in: The Tea Room
- 8
- 9
- 14 January 2025 at 11:47
  Paul Mills 4
- Myford Super 7 clutch
  Started by: john fletcher 1 in: Help and Assistance! (Offered or Wanted)
- 8
- 11
- 14 January 2025 at 10:39
  john fletcher 1
- A rather old contributor
  Started by: Sam Stones in: The Tea Room
- 8
- 9
- 13 January 2025 at 22:11
  Sam Stones
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 328
- 13 January 2025 at 21:16
  Brian Abbott

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies