The New Help and Assistance Topic

[Neil WyattModerator @neilwyatt]

Please read before posting!

[Neil WyattModerator @neilwyatt]

This new topic was suggested by a member who has helped out several other forum members with gifts of small tools, materials etc.

It's a more formal place to offer or request assistance in the form of surplus tools, materials, advice, loans of use of specialist machinery or tooling, or even a practical helping hand.

The only rule is that this MUST NOT BE FOR FINANCIAL GAIN!

• Private sales of good  should be made using the free classifieds.
• Commercial sales must be through proper adverts

Any posts appearing to break these rules will be deleted.

Now this does not mean you can't:

• Cover postage/copying/mileage costs or other genuine expenses if someone helps you out.
• Buy someone a pint or lunch as a thank you.
• Make a donation to a charity agreed with the person who helps you (or to REMAP or TAD, for example) in lieu of payment.

If you don't have your location in your profile, please give a rough idea in your posts, also, please use PMs to exchange emails and telephone addresses, and do use common sense when sharing your details with strangers.

Please feel free to continue this thread to discuss this idea and how it might develop, but do start new threads for any offers or requests for assistance.

Neil

Edited By JasonB on 21/12/2017 07:30:51

[Neil WyattModerator @neilwyatt]

Just a note to say that the same rules apply to 'wants' as well as sales.

If you need a set of plans or a specific tool, for example, please place a wanted classified as this would normally be something that is sold.

This is more a place to borrow things and expertise or give away surplus items, such as Oompa's incredibly popular plastic!

Thanks

Neil

[JasonBModerator @jasonb]

Sealey drill motor posts moved to here

[LambtonParticipant @lambton]

Mat I ask that anyone who requests and then receives help and advice be courteous enough to acknowledge the receipt of the help and also thank the kind person providing it.

This may sound a "given" but believe me I have offered and provided help to quite lot of forum members who do neither.

[Brian WoodParticipant @brianwood45127]

I'd like to echo Lambton's comment, I have had the same discourteous treatment many times and I sometimes wonders why I bother.

It is paricularly irksome when you have taken the trouble to post something as a gift and there is not even a 'thank you' even after asking if it got there.

Brian

[Neil WyattModerator @neilwyatt]

Enquiry moved to new topic: **LINK**

Please don't post actual enquiries in this thread, just in the topic.

Neil

[OuBallieParticipant @ouballie]

Neil,

Good idea this Thread!

Consider making a Sticky, as it will get lost in a day or two seing how active this Forum is.

Geoff – Doors off of the Ruby today, then off comes the body. Hooray!

[Jeff ChilverParticipant @jeffchilver13861]

does anyone have the G.A drawing of Harry Clarksons Steeple engine . And if so could they photo copy it . I believe it could be done with 4 sheets of A4 ..I have acquired the drawings and castings but the G.A has faded to unreadable .Will happily pay matl's postage etc . Thanks Jeff C.

[larry phelan 1Participant @larryphelan1]

Brian,

I for one hope that you continue to bother, since I have found you to be both courteous and helpful in the past.

Sad to say, I have experienced the same thing ,although not from Members of this Forum. People simply don't bother to say Thanks !

As my Mother used to say "Once they get their arse covered, they forget where they came from"

[Howard LewisParticipant @howardlewis46836]

Recently, I gave some unwanted bits to another poster, who wanted to help an impecunious friend in his village. He kindly made a donation to our club funds. So it was a win – win for both of us!.

Yes, donations to the donor's favourite charity, or to their M E Club funds is a splendid idea, and nice way of saying Thank You..

Howard

[JasonBModerator @jasonb]

Jeff check your inbox

[Robert ButlerParticipant @robertbutler92161]

Classifieds: I responded twice to the advertisement for the Myford turret but can't be certain they were forwarded to the seller as they are still advertised. Is there any way of checking as i am still interested. Robert Butler

[Neil WyattModerator @neilwyatt]

Posted by Robert Butler on 27/02/2020 21:58:59:

Classifieds: I responded twice to the advertisement for the Myford turret but can't be certain they were forwarded to the seller as they are still advertised. Is there any way of checking as i am still interested. Robert Butler

I'm afraid not, your emails will be sent direct to the seller.

Make sure you are not accidentally deleting the pre-entered text in the reply box, as if you do the seller won't know your email and will be unable to reply.

Neil

[Robert ButlerParticipant @robertbutler92161]

Dear Neil

Thank you, i will try again. Robert Butler

[Howard LewisParticipant @howardlewis46836]

If I have ever omitted to Thank those who have provided help or advice, please accept my apologies and Thanks.

We all learn a lot from other posters, for which we should be grateful., in person, or in public on here.

Howard

[egaParticipant @ega]

It's rewarding to be thanked for help but even better when the recipient tells you how they were able to make use of it.

[Robert ButlerParticipant @robertbutler92161]

Dear Neil I have successfully made contact with the vendor. thank you. Robert Butler

[Mike Salmon 2Participant @mikesalmon2]

I have recently replaced the motor on my bantam lathe (serial AA223) and reused the old motor pulley of about 2 1/2 inch diameter. Testing the Spindle speed, the lathe appears to be only achieving about half speed, whilst the motor is running at full speed (2800rpm). I suspect the lathe ran at the same low speed prior to the motor exchange and that the cause is directly attributable to the motor pulley being too small. The lathe started life as a 3 phase, 2 speed machine and was converted to single phase at some unknown point in its history. It is then that I suspect that the original pulley was, for some unknown reason, swapped out along with the original motor.

can anyone please inform what the motor pulley diameter should be used to obtain the 1600 rpm at the spindle. The gearbox pulley looks original ( approx 6&rdquo.

kind regards

mike

n.b. I’m no engineer, just a novice amateur.

[Dave Payne 1Participant @davepayne1]

Conundrum: 2” Scale Clayton Steam lorry  a new No 2 ( 11oz) injector from a reputable manufacture. Full flow water filter on the intake, tender vale to control flow, 3/16” thin water copper pipe to injector with 2 “easy” bends. ¼ x 40 clack valve ( Ball all free) No air leaks on supply pipe.

Turn cold feed on & a good flow, turn steam on & steam comes from  water outlet, injector won’t pick up, even when the steam supply is reduced. ( Tried at steam pressures from 50 >95) Have spoken to injector supplier who can’t understand what’s going on. Any ideas / thought’s.

Should also have said that the cones are in teh correct place and it is piped up correctly

Dave Payne

[noel shelleyParticipant @noelshelley55608]

The cold feed must be that, COLD ! Are the cones on a common axis ? Steam pressure may be good but is the volume great enough ? Can you try it on a test boiler to prove the injector ? If your near me you can try mine ! Noel

[larry phelan 1Participant @larryphelan1]

Brian, sad to say so many people are like that. I see it every day.

It,s enough to turn you off helping anyone.

[Dave Payne 1Participant @davepayne1]

Thanks, water going in is cold. Cones on a common axis. volume appears to be correct. I don’t have a test boiler.

[Harry WilkesParticipant @harrywilkes58467]

Dave small injectors can be a pain in the ass, with my 3″ Burrell my injector make unknown with 1/4 pipework I turn on the cold water fully I then slowly turn on the steam listening very carefully for the point when the injector ‘picks up’ at this point I then back the water off I can hear the water to the boiler increasing but I have to leave some water coming from the overflow. Good cold water flow and good joints as not to allow air in are essential. If you feel your flow and pipework are good I would then be inclined to ask the supplier to exchange it.

H

 

[Dave Payne 1Participant @davepayne1]

Thanks Harry much appreciated. All the pipework is ok ( full bore & gradual bends.) Tried everything as you have said still no “Joy” will go back to the supplier again.

[Author]

Posts