The Ghost of Christmas yet to come …

The Ghost of Christmas yet to come …

This topic has 4 replies, 4 voices, and was last updated 25 December 2021 at 14:36 by Grindstone Cowboy.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
25 December 2021 at 10:08 #36676
Michael Gilligan
Participant
@michaelgilligan61133
Advert

25 December 2021 at 10:08 #576694
Michael Gilligan
Participant
@michaelgilligan61133
Ignoring for the moment the relatively trivial impact of Mankind …

Here’s an interesting visualisation of what the Earth may look like:

**LINK**

https://theconversation.com/the-somalayas-are-the-biggest-mountain-range-you-will-never-see-173808

MichaelG.
25 December 2021 at 12:11 #576721
noel shelley
Participant
@noelshelley55608
VERY INTERESTING ! No point in worrying about climate change then ! Geothermal here we come. It will keep boiler makers in work. All the digging machines and scrapers in the world won't stop that ! Noel
25 December 2021 at 12:33 #576722
pgk pgk
Participant
@pgkpgk17461
Hmm..another maths question for the engineers? Down to the ocean floor off the Somali coast and drill through to the gulf of guinea.. What size bolt would be needed and what thread form?

pgk
25 December 2021 at 14:36 #576730
Grindstone Cowboy
Participant
@grindstonecowboy
1/4" BSF, they'll fit anything.

Rob
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 5
- 6
- 24 February 2025 at 23:55
  Charles Lamont
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 9
- 18
- 24 February 2025 at 22:49
  rjenkinsgb
- Source for trangular carbide inserts.
  Started by: Andrew Tinsley in: General Questions
- 8
- 12
- 24 February 2025 at 22:39
  Vic
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 1
- 1
- 24 February 2025 at 22:23
  Greensands
- Which “silent” air compressor shall I get? 1 2
  Started by: beeza650 in: Workshop Tools and Tooling
- 20
- 27
- 24 February 2025 at 21:47
  Nick Wheeler
- What’s this for…no.4?
  Started by: beeza650 in: Beginners questions
- 5
- 6
- 24 February 2025 at 21:32
  noel shelley
- What’s this for…no.3?
  Started by: beeza650 in: Beginners questions
- 6
- 6
- 24 February 2025 at 21:29
  noel shelley
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 35
- 24 February 2025 at 21:18
  Michael Gilligan
- Ml7 cross slide gib strip
  Started by: Compulsive purchaser in: Manual machine tools
- 2
- 2
- 24 February 2025 at 21:14
  Pete Rimmer
- Stirlingmotor ‘Rainer
  Started by: werz99 in: Work In Progress and completed items
- 1
- 1
- 24 February 2025 at 20:53
  werz99
- Motor Boys
  Started by: bernard towers in: General Questions
- 6
- 9
- 24 February 2025 at 20:50
  Roderick Jenkins
- Martin Evans Metro
  Started by: Philip Wheatcroft in: Locomotives
- 2
- 3
- 24 February 2025 at 20:14
  Philip Wheatcroft
- How Would I Machine this CAD designed Ratchet 1 2
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 14
- 27
- 24 February 2025 at 19:54
  Nigel Graham 2
- What’s this for…no.2?
  Started by: beeza650 in: Beginners questions
- 7
- 10
- 24 February 2025 at 19:46
  Tony Pratt 1
- Minnie Traction Engine – Driving Pin Position
  Started by: Richard B in: Help and Assistance! (Offered or Wanted)
- 4
- 6
- 24 February 2025 at 19:26
  Andy Stopford
- What’s this for?
  Started by: beeza650 in: Beginners questions
- 16
- 21
- 24 February 2025 at 19:23
  Andrew Crow
- Another Fobco Chuck
  Started by: spencerd72 in: Workshop Tools and Tooling
- 4
- 7
- 24 February 2025 at 18:23
  spencerd72
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 68
- 276
- 24 February 2025 at 17:09
  Neil Wyatt
- 3/16” BSF mill gib screws
  Started by: Graham Horne 2 in: General Questions
- 13
- 25
- 24 February 2025 at 15:32
  not done it yet
- New member – garage tinkerer
  Started by: spencerd72 in: Introduce Yourself – New members start here!
- 3
- 3
- 24 February 2025 at 14:15
  noel shelley
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 4
- 24 February 2025 at 13:21
  JasonB
- Arceurotrade New Sieg SC4 Lathe.
  Started by: Lathejack in: Manual machine tools
- 10
- 13
- 24 February 2025 at 13:09
  JasonB
- Looking for an OCR package with ‘snap’ facilities
  Started by: Greensands in: The Tea Room
- 1
- 1
- 24 February 2025 at 13:04
  Greensands
- Recommended books for starting model engineering
  Started by: Andrew Schofield in: Beginners questions
- 8
- 9
- 24 February 2025 at 13:04
  noel shelley
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 12
- 16
- 24 February 2025 at 11:42
  Dave Halford

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies