The Cowlairs Incline

The Cowlairs Incline

This topic has 1 reply, 2 voices, and was last updated 29 January 2025 at 14:00 by MichaelR.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
29 January 2025 at 12:29 #780782
Greensands
Participant
@greensands
I have been doing a bit of research on the Cowlairs Incline and would be interested in pointers to some historical links on the subject. For example, does anyone have access to an index to the Railway Mzazine. All information gratefully received.
Advert

29 January 2025 at 14:00 #780788
MichaelR
Participant
@michaelr
You may have seen these links they may be of interest https://canmore.org.uk/site/167770/glasgow-cowlairs-incline

https://www.railwaymagazine.co.uk/archive/index/

MichaelR
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Mind-Boggling Numbers
  Started by: Michael Gilligan in: The Tea Room
- 5
- 8
- 30 January 2025 at 13:48
  Michael Gilligan
- Transistor Circuit to Operate Relay from Arduino Uno 1 2
  Started by: James Alford in: Electronics in the Workshop
- 11
- 40
- 30 January 2025 at 13:38
  John Haine
- Had Another Go 1 2 … 13 14
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 337
- 30 January 2025 at 13:23
  David Jupp
- Fixing boiler cleading to firebox
  Started by: Peter Venn in: General Questions
- 6
- 6
- 30 January 2025 at 12:57
  duncan webster 1
- battery charger
  Started by: duncan webster 1 in: Electronics in the Workshop
- 11
- 17
- 30 January 2025 at 12:46
  duncan webster 1
- Myford S7 VFD problem
  Started by: Glyn Davies in: Manual machine tools
- 16
- 25
- 30 January 2025 at 11:43
  David Jupp
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 108
- 30 January 2025 at 11:43
  Graham Meek
- The wonders of AI…
  Started by: Robin Graham in: The Tea Room
- 5
- 6
- 30 January 2025 at 11:39
  Michael Gilligan
- Drawing Standards 1 2
  Started by: John Stevenson 1 in: CAD – Technical drawing & design
- 20
- 31
- 30 January 2025 at 11:31
  Martin Connelly
- Using Schneider ATV12 with remote terminal VW3A1006.
  Started by: chrismac in: Workshop Tools and Tooling
- 4
- 6
- 30 January 2025 at 11:01
  David Jupp
- Shades of black humour
  Started by: JimmieS in: The Tea Room
- 6
- 6
- 30 January 2025 at 10:00
  Hugh Stewart-Smith 1
- Wicking felt for lathe headstock bearings
  Started by: YouraT in: Manual machine tools
- 10
- 25
- 30 January 2025 at 02:54
  Michael Gilligan
- building milling machine made from scrap part 1
  Started by: celso ari schlichting in: General Questions
- 1
- 6
- 29 January 2025 at 21:50
  celso ari schlichting
- Press Fit 1 2
  Started by: Peter Simpson 3 in: Beginners questions
- 18
- 26
- 29 January 2025 at 20:25
  Peter Simpson 3
- Pressure washer?
  Started by: Frank Gorse in: General Questions
- 10
- 19
- 29 January 2025 at 20:17
  Frank Gorse
- Stanley knives 1 2
  Started by: old fool in: The Tea Room
- 22
- 35
- 29 January 2025 at 19:51
  Robert Atkinson 2
- CAD – Target Enigma 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 61
- 29 January 2025 at 19:50
  SillyOldDuffer
- Building Wilding’s Tower Clock
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 7
- 20
- 29 January 2025 at 19:15
  Chris Raynerd 2
- Tool identification
  Started by: Paul Radford in: Workshop Tools and Tooling
- 7
- 7
- 29 January 2025 at 17:11
  Martin Connelly
- My new AMABL290VF lathe
  Started by: thisdesignedthat in: Manual machine tools
- 3
- 3
- 29 January 2025 at 16:26
  Michael Gilligan
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 6
- 21
- 29 January 2025 at 16:16
  David George 1
- Engineers Black Book
  Started by: Me. in: General Questions
- 9
- 10
- 29 January 2025 at 15:39
  alan ord 2
- Camel back straight edge
  Started by: Me. in: General Questions
- 12
- 22
- 29 January 2025 at 15:24
  IanT
- Fixing center of balance wobble in diy lathe stand
  Started by: thisdesignedthat in: Manual machine tools
- 18
- 23
- 29 January 2025 at 14:36
  thisdesignedthat
- The Cowlairs Incline
  Started by: Greensands in: The Tea Room
- 2
- 2
- 29 January 2025 at 14:00
  MichaelR

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies