Subscription Numbers

Subscription Numbers

This topic has 1 reply, 1 voice, and was last updated 14 March 2016 at 11:54 by Neil Wyatt.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
14 March 2016 at 11:54 #229867
Neil Wyatt
Moderator
@neilwyatt
Over the last week we have had a number of people who have struggled to renew their subscriptions, as reminder letters have been sent out that feature a long number starting with 100… but not the subscription number, that starts with 40….

Unsurprisingly some people assume that the number is their subs number. This affects subscribers to both ME and MEW.

We will be writing to everyone affected by this mistake to confirm their correct subscription number and to advise them how to renew.

In the meantime if you have any queries please use the links or standard rate phone numbers HERE for assistance.

My sincere apologies to anyone and everyone affected by this mistake.

Neil
Advert

14 March 2016 at 11:54 #38904
Neil Wyatt
Moderator
@neilwyatt
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- EV Charging
  Started by: Vic in: The Tea Room
- 2
- 2
- 26 December 2024 at 12:11
  noel shelley
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 5 6
  Started by: Neil Wyatt in: Model Engineer.
- 52
- 140
- 26 December 2024 at 12:06
  JasonB
- Help for DIY lathe build.
  Started by: moogie in: Help and Assistance! (Offered or Wanted)
- 13
- 16
- 26 December 2024 at 11:30
  moogie
- Denatured Alcohol fuel alternative
  Started by: martino in: General Questions
- 6
- 6
- 26 December 2024 at 11:10
  mark smith 20
- What did you do Today 2024 1 2 … 20 21
  Started by: JasonB in: The Tea Room
- 75
- 522
- 26 December 2024 at 10:23
  Nick Hughes
- Threading a piece if laminated wood 1 2
  Started by: gerry madden in: Workshop Techniques
- 18
- 36
- 26 December 2024 at 10:06
  Neil Lickfold
- HobbyMat MD65 parts wanted
  Started by: duncan webster 1 in: Manual machine tools
- 4
- 5
- 26 December 2024 at 08:31
  Roger B
- Stuart Steam Boiler Feed Pump – Cylinder Scrapped
  Started by: David Deaville in: General Questions
- 7
- 12
- 26 December 2024 at 07:58
  michael howarth 1
- Seasons greetings
  Started by: bricky in: The Tea Room
- 21
- 22
- 25 December 2024 at 20:13
  Mark Easingwood
- Swarf build-up
  Started by: gerry madden in: Workshop Techniques
- 13
- 16
- 25 December 2024 at 20:12
  old mart
- Sable 2015 Desktop CNC / engraver 1 2
  Started by: Bazyle in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 9
- 26
- 25 December 2024 at 19:36
  JasonB
- How to sort this problem out.
  Started by: Michael Callaghan in: Workshop Techniques
- 13
- 18
- 25 December 2024 at 17:59
  noel shelley
- Condensation Problems in Workshop 1 2
  Started by: John McCulla in: General Questions
- 24
- 42
- 25 December 2024 at 16:57
  Chris Crew
- L5 issue
  Started by: Neil Taylor in: Beginners questions
- 9
- 14
- 25 December 2024 at 16:45
  Chris Crew
- Pencil Sharpener
  Started by: Vic in: The Tea Room
- 3
- 6
- 25 December 2024 at 12:34
  Vic
- Ooops! ‘Bye ‘Bye Alibre Atom
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 6
- 8
- 25 December 2024 at 12:29
  David Jupp
- MMBasic versions for Pico2 & Pico2W now available
  Started by: IanT in: Electronics in the Workshop
- 3
- 4
- 25 December 2024 at 11:28
  Philip Borland
- Replacement Motor Wiring
  Started by: Gary Lynch in: General Questions
- 6
- 16
- 25 December 2024 at 11:10
  noel shelley
- New member from belgium
  Started by: davp1971 in: Introduce Yourself – New members start here!
- 3
- 5
- 25 December 2024 at 10:09
  davp1971
- Forum Post downloads to user
  Started by: Speedy Builder5 in: Website Questions, Comments, and Suggestions
- 7
- 16
- 25 December 2024 at 08:56
  Michael Gilligan
- “Practical Armature Winding”
  Started by: john fletcher 1 in: Books
- 4
- 4
- 25 December 2024 at 07:37
  Speedy Builder5
- How do I disassemble Vickers dual metric/imperial dial?
  Started by: Russ B in: Help and Assistance! (Offered or Wanted)
- 8
- 25
- 24 December 2024 at 21:31
  thetiffy
- Scroll Chuck
  Started by: Vic in: The Tea Room
- 5
- 5
- 24 December 2024 at 19:59
  SillyOldDuffer
- Redwing
  Started by: grubscrew in: Stationary engines
- 5
- 7
- 24 December 2024 at 18:25
  JasonB
- New computer ? 1 2
  Started by: Peter Howell 1 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 14
- 27
- 24 December 2024 at 17:33
  Peter Howell 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies