Stuart SIRIUS on ebay

[Michael GilliganParticipant @michaelgilligan61133]

[Michael GilliganParticipant @michaelgilligan61133]

i have no connection with the sale, but this may be of interest : **LINK**

https://www.ebay.co.uk/itm/124787993014

MichaelG.

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[JasonBModerator @jasonb]

You could buy a set of castings from Stuarts for that and get the enjoyment of actually building one

[Michael GilliganParticipant @michaelgilligan61133]

Sorry, Jason … I [mis]understood that the Sirius castings were no longer available

Otherwise I wouldn’t have bothered mentioning it.

MichaelG.

.

@ bill … it may be overpriced if you pay what the seller is asking

If I was interested, I would start by pressing the (Make offer) button

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[Michael GilliganParticipant @michaelgilligan61133]

PostScript

Silly me …

I looked here: **LINK**

http://stuartturnersteam.com/Marine/Sirius/Sirius.html

not here: **LINK**

https://www.stuartmodels.com/item/59/stuart-sirius-unmachined

MichaelG.

[duncan webster 1Participant @duncanwebster1]

Having followed Michaels link I have sent off my £4 12s 6d plus purchase tax, I wonder if I'll get anything in return

Edited By duncan webster on 29/06/2021 13:23:14

[old martParticipant @oldmart]

It must be good, a steam engine from a smoke free home.

[Dave HalfordParticipant @davehalford22513]

I always worry when you see pipes broken off like that, like it may have been removed in a hurry.

[Former MemberParticipant @formermember12892]

[This posting has been removed]

[duncan webster 1Participant @duncanwebster1]

Has there ever been a design for a fabricated one?

[JasonBModerator @jasonb]

Easy enough to fabricate as there are really only two major castings. The crankcase is a bottomless box with the cylinders on top so easily silver soldered together from steel with drop in iron liners. The valve chest at the top can be cut from solid. Discwheel and pistons from Iron bar. Bed and conrods from Aluminium.

Just get a set of drawings for the cast one and take it from there.

 

Edited By JasonB on 29/06/2021 20:49:03

[Author]

Posts