STUART No8

STUART No8

This topic has 5 replies, 5 voices, and was last updated 30 August 2020 at 21:45 by duncan webster 1.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
30 August 2020 at 18:09 #493460
Andy_C
Participant
@andy_c
As autumn starts to make an appearance I am now thinking about rebuilding this stuart no 8. What would be recommended for stripping the green paint back to bare metal to start the painting regime afresh?
Advert

30 August 2020 at 18:09 #3414
Andy_C
Participant
@andy_c
30 August 2020 at 18:18 #493461
not done it yet
Participant
@notdoneityet
Take it apart and dunk all the painted items in paint stripper?
30 August 2020 at 20:13 #493475
Baz
Participant
@baz89810
Paint stripper from one of the large diy outlets or cellulose thinners.
30 August 2020 at 20:37 #493477
Dave Halford
Participant
@davehalford22513
Brake fluid might work depending on the paint, rinse with water when done.
30 August 2020 at 21:45 #493480
duncan webster 1
Participant
@duncanwebster1
On the non brass bits immerse in caustic soda. Rinse and dry as soon as you take it out as or it will rust. Don't get it on your hands. It can be tipped down the drain when you've finished
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Refurbishing alloy wheels
  Started by: Mike Crossfield in: The Tea Room
- 9
- 11
- 15 January 2025 at 13:36
  Mike Crossfield
- Tool height: Glanze parting tool in Myford S7
  Started by: gabrielb in: Workshop Tools and Tooling
- 11
- 15
- 15 January 2025 at 13:34
  Diogenes
- Coal 1 2
  Started by: Michael Callaghan in: General Questions
- 22
- 46
- 15 January 2025 at 13:25
  Graham Meek
- Unkown micrometer manufacturer 1 2
  Started by: Tomk in: Workshop Tools and Tooling
- 15
- 48
- 15 January 2025 at 13:24
  Grindstone Cowboy
- Flashing Multiple LEDs at the Same Time
  Started by: James Alford in: Electronics in the Workshop
- 5
- 11
- 15 January 2025 at 12:41
  James Alford
- Myford Super 7 questions
  Started by: davp1971 in: Help and Assistance! (Offered or Wanted)
- 4
- 8
- 15 January 2025 at 11:18
  JohnF
- Subscriptions – Going Forward 1 2 … 4 5
  Started by: JasonB in: Subscription issues and Digital magazines
- 36
- 117
- 15 January 2025 at 10:48
  SillyOldDuffer
- Had Another Go 1 2 … 6 7
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 19
- 164
- 15 January 2025 at 10:28
  David Jupp
- Harrogate 2025 ??
  Started by: Kevin Hunter in: Exhibitions, Shows and Club Events
- 6
- 6
- 15 January 2025 at 10:08
  Les Riley
- Mobile workshop
  Started by: Sonic Escape in: The Tea Room
- 10
- 16
- 15 January 2025 at 09:52
  bernard towers
- leaded mild steel.
  Started by: mark smith 20 in: Materials
- 5
- 7
- 15 January 2025 at 09:37
  JasonB
- Internal thread & taper in same hole
  Started by: Dell in: Workshop Techniques
- 10
- 24
- 14 January 2025 at 22:18
  Howard Lewis
- New Member
  Started by: gabrielb in: Introduce Yourself – New members start here!
- 3
- 3
- 14 January 2025 at 21:53
  Howard Lewis
- new life for old chuck
  Started by: old mart in: Workshop Tools and Tooling
- 7
- 19
- 14 January 2025 at 17:46
  Harry Wilkes
- Fitting chucks to 7 x 12 type baby lathes
  Started by: old mart in: Manual machine tools
- 5
- 9
- 14 January 2025 at 16:40
  old mart
- Bronze round tube
  Started by: jefferybond in: Materials
- 4
- 4
- 14 January 2025 at 16:29
  old mart
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 9 10
  Started by: Neil Wyatt in: Model Engineer.
- 60
- 226
- 14 January 2025 at 15:46
  JasonB
- Weiss 290 Lathe Power Issue
  Started by: thisdesignedthat in: Manual machine tools
- 6
- 12
- 14 January 2025 at 15:05
  thisdesignedthat
- Reilang Oil Can washer?
  Started by: Bo’sun in: Workshop Tools and Tooling
- 6
- 12
- 14 January 2025 at 14:15
  Chris Kaminski
- Francis W Shaw bench planer
  Started by: Rob Gough in: Manual machine tools
- 8
- 22
- 14 January 2025 at 14:08
  Rob Gough
- Editing an STL file
  Started by: Paul L in: CAD – Technical drawing & design
- 9
- 17
- 14 January 2025 at 12:36
  Another JohnS
- Powder coating
  Started by: John MC in: The Tea Room
- 8
- 9
- 14 January 2025 at 11:47
  Paul Mills 4
- Myford Super 7 clutch
  Started by: john fletcher 1 in: Help and Assistance! (Offered or Wanted)
- 8
- 11
- 14 January 2025 at 10:39
  john fletcher 1
- A rather old contributor
  Started by: Sam Stones in: The Tea Room
- 8
- 9
- 13 January 2025 at 22:11
  Sam Stones
- Brian’s 1″ Minnie Traction Engine 1 2 … 13 14
  Started by: Brian Abbott in: Traction engines
- 38
- 328
- 13 January 2025 at 21:16
  Brian Abbott

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4759

January 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies