Source of scale checker plate?

Source of scale checker plate?

This topic has 6 replies, 5 voices, and was last updated 1 August 2021 at 10:22 by Ivan Schuch.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
30 July 2021 at 15:55 #556420
Bryan Cedar 1
Participant
@bryancedar1
Can any kind forum member advise me where I may obtain scale checker plate for the cab floor of a 5" loco. I did find one supplier but the cost was very high.
Advert

30 July 2021 at 15:55 #2049
Bryan Cedar 1
Participant
@bryancedar1
30 July 2021 at 16:03 #556422
Steve F
Participant
@stevef
Hi

Bruce Engineering (Polly) sell it

regards

Steve
30 July 2021 at 16:43 #556430
geoff adams
Participant
@geoffadams14047
i machined my own on my cnc mill have a look in my albums for examples when i asked the question on what looked right

Geoff
30 July 2021 at 18:01 #556439
bernard towers
Participant
@bernardtowers37738
Blackgates used to sell it in 3 sizes but it was a fair while ago.
31 July 2021 at 10:16 #556516
Bryan Cedar 1
Participant
@bryancedar1
Many thanks to all who responded. Will follow up the leads.
1 August 2021 at 10:22 #556638
Ivan Schuch
Participant
@ivanschuch53451
Squires model and craft tools. Page 6 on the materials catalogue:

http://www.squirestools.com/files/Materials%20Jan%202020.pdf
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- boring for crankshaft
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 3
- 3
- 4 March 2025 at 06:56
  JasonB
- Turning Question: Fine Chatter / Wave Pattern 1 2
  Started by: Nigel Graham 2 in: General Questions
- 13
- 30
- 4 March 2025 at 05:20
  Simon Collier
- Continuing the Television theme …
  Started by: Michael Gilligan in: Electronics in the Workshop
- 8
- 14
- 4 March 2025 at 01:08
  Nicholas Farr
- Case hardening
  Started by: Garry Coles in: General Questions
- 7
- 10
- 3 March 2025 at 21:41
  Fulmen
- What’s this for…no.8?
  Started by: beeza650 in: Beginners questions
- 9
- 16
- 3 March 2025 at 21:38
  Georgineer
- A” WEAVER “1CC DIESEL ENGINE 1 2
  Started by: KEITH BEAUMONT in: I/C Engines
- 8
- 29
- 3 March 2025 at 21:24
  jimbo7636
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 18
- 3 March 2025 at 20:56
  Tomek
- Use of a weighted cord for bullwheel indexing.
  Started by: Greensands in: Workshop Techniques
- 8
- 10
- 3 March 2025 at 20:51
  John Purdy
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 5
- 5
- 3 March 2025 at 20:41
  old mart
- Lead-sheathed wiring – why? 1 2
  Started by: gerry madden in: Materials
- 24
- 28
- 3 March 2025 at 20:36
  old mart
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 14
- 23
- 3 March 2025 at 20:23
  Julie Ann
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 14
- 32
- 3 March 2025 at 20:13
  old mart
- Another lidl picture fail
  Started by: Ian Parkin in: The Tea Room
- 4
- 5
- 3 March 2025 at 19:25
  V8Eng
- Taig lathe DC motor 1 2
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 10
- 26
- 3 March 2025 at 19:15
  John Haine
- Dr Schlesinger
  Started by: ryan.carter848 in: Books
- 4
- 5
- 3 March 2025 at 11:58
  Phil P
- Windows 11 Upgrade – non compliant machines.
  Started by: Peter Cook 6 in: The Tea Room
- 6
- 7
- 3 March 2025 at 10:01
  Howi
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 7
- 12
- 3 March 2025 at 09:13
  Circlip
- Slow Again? 1 2
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 50
- 3 March 2025 at 08:17
  SillyOldDuffer
- Always be careful
  Started by: Blue Heeler in: The Tea Room
- 2
- 2
- 3 March 2025 at 08:06
  Nealeb
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 12
- 20
- 2 March 2025 at 21:21
  Fulmen
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 14
- 16
- 2 March 2025 at 19:24
  flatline
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 9
- 20
- 2 March 2025 at 19:19
  Colin Bishop
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 5
- 7
- 2 March 2025 at 16:54
  Speedy Builder5
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 54
- 172
- 2 March 2025 at 15:18
  JasonB
- What’s this for…no.7?
  Started by: beeza650 in: Beginners questions
- 5
- 8
- 2 March 2025 at 15:17
  beeza650

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies