Small CNC milling machines – any hints/tips

Small CNC milling machines – any hints/tips

This topic has 3 replies, 3 voices, and was last updated 12 January 2011 at 10:37 by Laurence B.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
11 January 2011 at 20:03 #62252
David Gray 2
Participant
@davidgray2
I am thinking about buying a CNC milling machine – does anyone have any guidance or advice. Thanks
Advert

11 January 2011 at 20:03 #14940
David Gray 2
Participant
@davidgray2
11 January 2011 at 20:54 #62257
Anonymous
David,

I sent you a PM.

Regards,

Andrew
12 January 2011 at 10:37 #62284
Laurence B
Participant
@laurenceb
Perhaps you could have a look at the range of “Wabeco” machines supplied by Pro Machine Tools (link on this page) I have a non-CNC mill of theirs and it is excellent.Not cheap,but a quality machine.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Lathe help information
  Started by: maccecht in: Help and Assistance! (Offered or Wanted)
- 11
- 22
- 21 February 2025 at 16:59
  Bootlegger Blacky
- Lathe Chuck thread size
  Started by: Bootlegger Blacky in: Workshop Tools and Tooling
- 1
- 1
- 21 February 2025 at 16:55
  Bootlegger Blacky
- Electric Mobility
  Started by: Vic in: The Tea Room
- 3
- 5
- 21 February 2025 at 16:00
  Michael Gilligan
- Just purchased a lot of stuff
  Started by: beeza650 in: Beginners questions
- 2
- 4
- 21 February 2025 at 15:45
  beeza650
- VERY delicate rust removal
  Started by: beeza650 in: Beginners questions
- 11
- 16
- 21 February 2025 at 14:55
  ryan.carter848
- indexing head lathe 1 2
  Started by: Danni Burns in: Manual machine tools
- 15
- 33
- 21 February 2025 at 14:49
  Danni Burns
- Cannot access homeworkshop.
  Started by: Graham Titman in: The Tea Room
- 3
- 3
- 21 February 2025 at 14:36
  Michael Gilligan
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 10 11
  Started by: Neil Wyatt in: Model Engineer.
- 68
- 268
- 21 February 2025 at 14:30
  duncan webster 1
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 8
- 18
- 21 February 2025 at 13:22
  Colin Bishop
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 51
- 156
- 21 February 2025 at 13:03
  JasonB
- Interesting USB C Cable
  Started by: Vic in: The Tea Room
- 2
- 3
- 21 February 2025 at 12:54
  Vic
- End mill sharpening fixture
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 21 February 2025 at 10:18
  JohnF
- New Member – Unimat 3 Owner
  Started by: pennyblack in: Introduce Yourself – New members start here!
- 2
- 2
- 21 February 2025 at 09:57
  Graham Meek
- Digital Log In
  Started by: John Ross 4 in: General Questions
- 2
- 3
- 21 February 2025 at 09:46
  John Ross 4
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 4
- 6
- 21 February 2025 at 09:36
  noel shelley
- New Myford Owner with Problems!!!
  Started by: Richard Bartholomew 3 in: Introduce Yourself – New members start here!
- 11
- 14
- 21 February 2025 at 09:12
  Charles Lamont
- SHARP PRACTICE ?
  Started by: Speedy Builder5 in: The Tea Room
- 10
- 19
- 20 February 2025 at 23:41
  Vic
- Cranko No2 Oscillating Horizontal Steam Engine from New Zealand circ 1940 – 1950
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 20 February 2025 at 23:23
  Blue Heeler
- Cut & Paste Oddity (Textual)?
  Started by: Nigel Graham 2 in: The Tea Room
- 1
- 1
- 20 February 2025 at 22:53
  Nigel Graham 2
- Telephone call-blocking
  Started by: Michael Gilligan in: The Tea Room
- 7
- 16
- 20 February 2025 at 21:07
  Paul Lousick
- A Marine Condensing Engine 1 2 … 5 6
  Started by: Ramon Wilson in: Work In Progress and completed items
- 26
- 129
- 20 February 2025 at 18:12
  Ramon Wilson
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 9
- 16
- 20 February 2025 at 17:48
  Michael Gilligan
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 109
- 20 February 2025 at 17:08
  Graham Meek
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 18
- 92
- 20 February 2025 at 16:50
  SillyOldDuffer
- Diamond Wheel dressing attachment
  Started by: David George 1 in: Help and Assistance! (Offered or Wanted)
- 10
- 19
- 20 February 2025 at 16:00
  David George 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies