Sherline chuck.

[lancelotParticipant @lancelot]

[lancelotParticipant @lancelot]

Hi folks, any Sherline lathe users out there…I am at the moment working on building the James Coombes, I have the pulley shaft clamped in the 3 jaw scroll chuck…problem is , my memory keeps letting me down , i can not think of which way to turn the chuck to loosen it …can anyone help .

all the best for now,

John.

[Nick_GParticipant @nick_g]

.

At a guess. As the lathe (looking at the chuck face) spends the the vast majority of it's time running anti-clockwise I would say the chuck also unscrews anti-clockwise.

 

Nick

Edited By Nick_G on 19/07/2014 20:48:36

[JasonBModerator @jasonb]

Think its the same as a Unimat 3, pull the tommy bar in the chuck towards you to undo, away to tighten while holding the one in the knurled back ring still

[lancelotParticipant @lancelot]

This is what I am building…

 

 

Link Added to other post by JasonB

Edited By JasonB on 20/07/2014 07:41:07

[lancelotParticipant @lancelot]

(Ctrl/Cmd+V pull the tommy bar in the chuck towards you to undo, away to tighten while holding the one in the knurled back ring still

Thank you chaps, chuck now sorted Jason…I do not take to that chuck at allgoing to look out for a much better one.

[Michael GilliganParticipant @michaelgilligan61133]

Some useful information, and links to dimensional drawings, here

MichaelG

[lancelotParticipant @lancelot]

Hi Michael

got the link, will be very useful

John.

[Author]

Posts