Shand Mason fire pump

Shand Mason fire pump

This topic has 2 replies, 2 voices, and was last updated 19 March 2015 at 10:56 by Ian S C.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
18 March 2015 at 16:25 #183639
Shandyman
Participant
@shandyman
To those guys who contacted me back in 2011 I must apologise sincerely. Circumstances beyond my control prevented any correspondence for the past few years. However, I'm pleased to say things are up and running now and I have decided to carry on and finish the 2" Shand Mason. The carriage is complete, the boiler is done and I have just started the lovely job of machining the gunmetal castings. I would be pleased to swap notes with anyone involved in a similar project. I have no time scale on this as the joy for me is in the challenge of making the parts not the end product.
Advert

18 March 2015 at 16:25 #4248
Shandyman
Participant
@shandyman
19 March 2015 at 10:56 #183738
Ian S C
Participant
@iansc
John, good to have you back among us.

Ian S C
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Chester Super Lux advice 1 2 … 6 7
  Started by: Taf_Pembs in: Manual machine tools
- 21
- 161
- 3 December 2024 at 21:57
  SillyOldDuffer
- What is (Traditional) Model Engineering? 1 2 … 4 5
  Started by: Martin Kyte in: General Questions
- 34
- 102
- 3 December 2024 at 21:42
  SillyOldDuffer
- Wiring a contactor
  Started by: Charles Lamont in: Workshop Tools and Tooling
- 9
- 14
- 3 December 2024 at 20:29
  SillyOldDuffer
- Building Wilding’s Tower Clock
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 5
- 13
- 3 December 2024 at 20:28
  bernard towers
- Lathe vibration in workshop 1 2
  Started by: Mark Salzedo 1 in: General Questions
- 21
- 44
- 3 December 2024 at 20:16
  Mark Salzedo 1
- Jaguar [oh dear] 1 2
  Started by: Michael Gilligan in: The Tea Room
- 21
- 36
- 3 December 2024 at 19:20
  Robert Atkinson 2
- Coke Fired :)
  Started by: Michael Gilligan in: The Tea Room
- 3
- 3
- 3 December 2024 at 16:33
  Russell Eberhardt
- Beaverpal Mill strip for moving/disposal? Advice please
  Started by: pete hammond in: Manual machine tools
- 4
- 7
- 3 December 2024 at 15:09
  pete hammond
- Strange drilling situation
  Started by: gerry madden in: Workshop Techniques
- 19
- 23
- 3 December 2024 at 12:45
  gerry madden
- A small 4-jaw chuck
  Started by: Michael Gilligan in: Suggested Online Resources
- 8
- 8
- 3 December 2024 at 12:11
  bernard towers
- Did the British Invent EVERYTHING! 1 2
  Started by: SillyOldDuffer in: The Tea Room
- 22
- 36
- 3 December 2024 at 11:59
  Derek Drover
- Muffle furnace 1 2
  Started by: Sonic Escape in: Work In Progress and completed items
- 15
- 38
- 3 December 2024 at 09:49
  noel shelley
- Eclipse No 39 Drill sharpener Instructions.
  Started by: Andrew Tinsley in: General Questions
- 2
- 4
- 3 December 2024 at 08:40
  MichaelR
- Loctite advice Stuart Triple
  Started by: DEREK SPEDDING 1 in: Stationary engines
- 12
- 17
- 3 December 2024 at 02:29
  Michael Gilligan
- iPadOS 18
  Started by: Vic in: The Tea Room
- 5
- 8
- 2 December 2024 at 22:25
  Vic
- What did you do Today 2024 1 2 … 19 20
  Started by: JasonB in: The Tea Room
- 71
- 486
- 2 December 2024 at 21:04
  Andy Stopford
- Getting started to build live steam 1 2
  Started by: joshingjosh in: Locomotives
- 12
- 26
- 2 December 2024 at 18:45
  Howard Lewis
- Frustrated and unsafe.
  Started by: Coggy Clapsaddle in: The Tea Room
- 9
- 13
- 2 December 2024 at 18:43
  Howard Lewis
- bronze flat bars
  Started by: matric in: General Questions
- 6
- 8
- 2 December 2024 at 18:19
  matric
- Drawings for 5 inch gauge royal Scot.
  Started by: Michael Callaghan in: Locomotives
- 2
- 2
- 2 December 2024 at 15:13
  Nicholas Farr
- Solder Flux paste UV50vs Uv80
  Started by: Michael Gilligan in: Electronics in the Workshop
- 2
- 5
- 2 December 2024 at 14:59
  Grindstone Cowboy
- Rite of Passage build – Elmers Standby
  Started by: Robert Bowen-Cattry in: Work In Progress and completed items
- 10
- 16
- 2 December 2024 at 14:52
  duncan webster 1
- PB102, Colphos 90 or other?
  Started by: Robert Smith 24 in: Materials
- 6
- 12
- 2 December 2024 at 10:27
  Robert Smith 24
- Traction Engine Identification Help Please…. 1 2 3
  Started by: Bill Morgan in: Traction engines
- 11
- 56
- 1 December 2024 at 22:26
  Nigel Graham 2
- Dismantling the Pratt Burnerd Myford 3 jaw chuck 1 2
  Started by: icon in: Workshop Tools and Tooling
- 16
- 31
- 1 December 2024 at 20:18
  David George 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4757

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies