Rider Ericson Engine

Rider Ericson Engine

This topic has 1 reply, 1 voice, and was last updated 17 October 2013 at 14:29 by Sub Mandrel.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
17 October 2013 at 14:29 #37611
Sub Mandrel
Participant
@submandrel
Advert

17 October 2013 at 14:29 #132908
Sub Mandrel
Participant
@submandrel
An interesting series this one, patricularly as it is a lot bigger than the models I make.

I spotted a minor error in the drawings – the bore of the bronze valve is shown , but not any other dimensions. None are critical,. as long as it is big enough to cover the holes and small enough to be free in the pump bore.

Neil
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- What is (Traditional) Model Engineering? 1 2 … 4 5
  Started by: Martin Kyte in: General Questions
- 34
- 103
- 4 December 2024 at 07:36
  derek hall 1
- Model Subjects that Inspire, and to Aspire to..
  Started by: Diogenes in: Miscellaneous models
- 1
- 3
- 4 December 2024 at 07:31
  Diogenes
- Dismantling the Pratt Burnerd Myford 3 jaw chuck 1 2
  Started by: icon in: Workshop Tools and Tooling
- 16
- 33
- 4 December 2024 at 03:50
  Michael Gilligan
- Chester Super Lux advice 1 2 … 6 7
  Started by: Taf_Pembs in: Manual machine tools
- 21
- 162
- 3 December 2024 at 22:51
  Taf_Pembs
- Beaverpal Mill strip for moving/disposal? Advice please
  Started by: pete hammond in: Manual machine tools
- 5
- 8
- 3 December 2024 at 22:29
  Pete
- Wiring a contactor
  Started by: Charles Lamont in: Workshop Tools and Tooling
- 9
- 14
- 3 December 2024 at 20:29
  SillyOldDuffer
- Building Wilding’s Tower Clock
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 5
- 13
- 3 December 2024 at 20:28
  bernard towers
- Lathe vibration in workshop 1 2
  Started by: Mark Salzedo 1 in: General Questions
- 21
- 44
- 3 December 2024 at 20:16
  Mark Salzedo 1
- Jaguar [oh dear] 1 2
  Started by: Michael Gilligan in: The Tea Room
- 21
- 36
- 3 December 2024 at 19:20
  Robert Atkinson 2
- Coke Fired :)
  Started by: Michael Gilligan in: The Tea Room
- 3
- 3
- 3 December 2024 at 16:33
  Russell Eberhardt
- Strange drilling situation
  Started by: gerry madden in: Workshop Techniques
- 19
- 23
- 3 December 2024 at 12:45
  gerry madden
- A small 4-jaw chuck
  Started by: Michael Gilligan in: Suggested Online Resources
- 8
- 8
- 3 December 2024 at 12:11
  bernard towers
- Did the British Invent EVERYTHING! 1 2
  Started by: SillyOldDuffer in: The Tea Room
- 22
- 36
- 3 December 2024 at 11:59
  Derek Drover
- Muffle furnace 1 2
  Started by: Sonic Escape in: Work In Progress and completed items
- 15
- 38
- 3 December 2024 at 09:49
  noel shelley
- Eclipse No 39 Drill sharpener Instructions.
  Started by: Andrew Tinsley in: General Questions
- 2
- 4
- 3 December 2024 at 08:40
  MichaelR
- Loctite advice Stuart Triple
  Started by: DEREK SPEDDING 1 in: Stationary engines
- 12
- 17
- 3 December 2024 at 02:29
  Michael Gilligan
- iPadOS 18
  Started by: Vic in: The Tea Room
- 5
- 8
- 2 December 2024 at 22:25
  Vic
- What did you do Today 2024 1 2 … 19 20
  Started by: JasonB in: The Tea Room
- 71
- 486
- 2 December 2024 at 21:04
  Andy Stopford
- Getting started to build live steam 1 2
  Started by: joshingjosh in: Locomotives
- 12
- 26
- 2 December 2024 at 18:45
  Howard Lewis
- Frustrated and unsafe.
  Started by: Coggy Clapsaddle in: The Tea Room
- 9
- 13
- 2 December 2024 at 18:43
  Howard Lewis
- bronze flat bars
  Started by: matric in: General Questions
- 6
- 8
- 2 December 2024 at 18:19
  matric
- Drawings for 5 inch gauge royal Scot.
  Started by: Michael Callaghan in: Locomotives
- 2
- 2
- 2 December 2024 at 15:13
  Nicholas Farr
- Solder Flux paste UV50vs Uv80
  Started by: Michael Gilligan in: Electronics in the Workshop
- 2
- 5
- 2 December 2024 at 14:59
  Grindstone Cowboy
- Rite of Passage build – Elmers Standby
  Started by: Robert Bowen-Cattry in: Work In Progress and completed items
- 10
- 16
- 2 December 2024 at 14:52
  duncan webster 1
- PB102, Colphos 90 or other?
  Started by: Robert Smith 24 in: Materials
- 6
- 12
- 2 December 2024 at 10:27
  Robert Smith 24

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4757

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies