Publication date

Publication date

This topic has 3 replies, 2 voices, and was last updated 29 June 2012 at 22:12 by AndyP.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
29 June 2012 at 21:10 #93349
AndyP
Participant
@andyp13730
Is it possible to state the publication schedule for MEW? so that I know when to start giving my newsagent grief if it hasn't materialised.
Andy
Suggesting a subscription is unhelpful.
Advert

29 June 2012 at 21:10 #38134
AndyP
Participant
@andyp13730
When should MEW appear in the shops
29 June 2012 at 21:49 #93354
David Clark 13
Participant
@davidclark13
Hi There

MEW is every 4 weeks.
However, if you look in your current issue for the next issue page, it tells you when the next issue will be on sale.

regards David
29 June 2012 at 22:12 #93357
AndyP
Participant
@andyp13730
Thanks David, I should have seen that ! Calendar marked up.

Andy
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Diesel Heaters
  Started by: Peter Simpson 3 in: General Questions
- 7
- 8
- 19 November 2024 at 16:34
  Steviegtr
- Sanding Belts for 4×36 Machine
  Started by: William Chitham in: Workshop Tools and Tooling
- 3
- 3
- 19 November 2024 at 15:31
  Plasma
- New Memeber in Norfolk, UK
  Started by: petetwissell in: Introduce Yourself – New members start here!
- 7
- 7
- 19 November 2024 at 15:15
  Harry Wilkes
- Which motor ?
  Started by: here again in: Manual machine tools
- 8
- 22
- 19 November 2024 at 15:02
  Bazyle
- ML10 questions
  Started by: 1957jmh in: Beginners questions
- 10
- 10
- 19 November 2024 at 14:36
  Roderick Jenkins
- chenery 9 cylinder gnome
  Started by: charlie9cyl in: I/C Engines
- 5
- 5
- 19 November 2024 at 13:43
  Andy Stopford
- opposed twin engine calculations
  Started by: bricky in: I/C Engines
- 10
- 15
- 19 November 2024 at 12:47
  petetwissell
- Fuel tap
  Started by: Dalboy in: General Questions
- 2
- 3
- 19 November 2024 at 12:34
  Dalboy
- Using relays 1 2
  Started by: Graham Titman in: General Questions
- 11
- 26
- 19 November 2024 at 12:15
  Howard Lewis
- 100g +/- 0.1 mg metrology weight standard?
  Started by: Ian P in: Workshop Tools and Tooling
- 4
- 7
- 19 November 2024 at 09:53
  Michael Gilligan
- Restoration of a Watchmaker’s Drill Press
  Started by: Michael Gilligan in: Suggested Online Resources
- 2
- 2
- 19 November 2024 at 09:49
  Harry Wilkes
- Jakobs Gear Hobber from scrap (no casting)
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 19 November 2024 at 08:52
  David George 1
- boiler leak
  Started by: Bill Dawes in: Locomotives
- 10
- 18
- 18 November 2024 at 23:23
  Bill Dawes
- 30 Year old MOTORUN 3 Phase Static converter 1 2 3
  Started by: mr fixit in: Introduce Yourself – New members start here!
- 13
- 61
- 18 November 2024 at 22:59
  mr fixit
- DIY Homemade Lamp Running off PM Research Model Generator
  Started by: Blue Heeler in: Stationary engines
- 2
- 3
- 18 November 2024 at 22:21
  Blue Heeler
- MEW 346 creates new definition of ‘universal’,
  Started by: Ian P in: Model Engineers’ Workshop.
- 1
- 1
- 18 November 2024 at 21:38
  Ian P
- What did you do Today 2024 1 2 … 18 19
  Started by: JasonB in: The Tea Room
- 67
- 455
- 18 November 2024 at 20:11
  Nicholas Farr
- New Here
  Started by: garryh in: Introduce Yourself – New members start here!
- 6
- 14
- 18 November 2024 at 19:49
  garryh
- Tap alignment in the mill and lathe? 1 2 3
  Started by: Bo’sun in: Workshop Tools and Tooling
- 21
- 52
- 18 November 2024 at 19:42
  bernard towers
- Wellsaw 4″ Hacksaw Info
  Started by: John McCulla in: Manual machine tools
- 7
- 13
- 18 November 2024 at 19:17
  Pete Rimmer
- Ultracut 370 alternatives
  Started by: Mick Bailey in: Materials
- 5
- 6
- 18 November 2024 at 17:53
  mark costello 1
- Anybody recognise this design?
  Started by: Paul Kemp in: Stationary engines
- 9
- 15
- 18 November 2024 at 17:53
  John Purdy
- Parvalux motor – help please
  Started by: Mike Waldron in: Manual machine tools
- 13
- 22
- 18 November 2024 at 17:47
  Michael Gilligan
- Hot rolled angle problems 1 2
  Started by: Mick Bailey in: Materials
- 17
- 42
- 18 November 2024 at 14:44
  duncan webster 1
- Interesting Chuck design
  Started by: Vic in: Workshop Tools and Tooling
- 9
- 19
- 18 November 2024 at 13:34
  Vic

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4755

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies