New subscriber from France

[Didier YvronParticipant @didieryvron]

Hello from France,

I just receive my first issue the morning. Verry good magazine, but I have a question: Why I have not access to digital issues for MEW but only for Model Engineer (subcriber from last december) ?

Regards

Didier

[Didier YvronParticipant @didieryvron]

[Nicholas FarrParticipant @nicholasfarr14254]

Hi Didier, you only get digital access to the magazine you subcribe to, so you would need to subcribe to MEW as well to get access to both digital issues.

Regards Nick.

[Russell EberhardtParticipant @russelleberhardt48058]

Bonjour et bienvenu.

Russell (Dept. 66)

[Didier YvronParticipant @didieryvron]

Posted by Russell Eberhardt on 07/05/2013 07:43:17:

Bonjour et bienvenu.

Russell (Dept. 66)

Merci Russel

[Didier YvronParticipant @didieryvron]

Posted by Nicholas Farr on 07/05/2013 06:45:35:

Hi Didier, you only get digital access to the magazine you subcribe to, so you would need to subcribe to MEW as well to get access to both digital issues.

Regards Nick.

Hi Nick

As well I have subcribed to the both magazines and put my numbers in my details, but I have only access to Model Engineer and not to MEW digitals issues. I am very desappointed.

Regards

Didier

[Robert DoddsParticipant @robertdodds43397]

Didier,

Sounds like a job for one of the editors of the magazines

See

http://www.model-engineer.co.uk/editorial/page.asp?p=227

for details of contacting them

Bob D

[Speedy Builder5Participant @speedybuilder5]

Bonjour Didier,

I hope your problem is resolved soon. Which department do you live in ? We are in Lot (46) and find it difficult to find small quantities of material in France at reasonable prices. Many UK suppliers will send material, but of course the postage can be a bit expensive. We would be interested if you know of some good vendors.

Bob Humphrey.

[simondavies3Participant @simondavies3]

Bonjour Bob,

We are in Bouches du Rhone (13) and I get most of my brass and some aluminium from Tartaix in Paris, I have looked at Qualichutes recently (but not bought from them) and also from a guy calling himself blockenstock advertising on leboncoin.

Will be interested to hear of any others, especially down here in the south.

Simon

[simondavies3Participant @simondavies3]

Bonjour Bob,

We are in Bouches du Rhone (13) and I get most of my brass and some aluminium from Tartaix in Paris, I have looked at Qualichutes recently (but not bought from them) and also from a guy calling himself blockenstock advertising on leboncoin.

Will be interested to hear of any others, especially down here in the south.

Simon

[Nicholas FarrParticipant @nicholasfarr14254]

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

[Nicholas FarrParticipant @nicholasfarr14254]

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

[Didier YvronParticipant @didieryvron]

Posted by Speedy Builder5 on 07/05/2013 12:00:26:

Bonjour Didier,

I hope your problem is resolved soon. Which department do you live in ? We are in Lot (46) and find it difficult to find small quantities of material in France at reasonable prices. Many UK suppliers will send material, but of course the postage can be a bit expensive. We would be interested if you know of some good vendors.

Bob Humphrey.

I live in Bretagne, on l'Ile de Sein in Finistère. I nknow the problem to find material in France. I use Qualichutes et Blockenstok for steel Aluminium brass and bronze.

You are lucky in UK when I see the crowd of vendors of material and tools I think it's a paradise for model engineers and it's the reason why I buy the most part of my tools and castings in UK.

Regards

Didier

Edited By Didier Yvron on 07/05/2013 17:49:12

[Didier YvronParticipant @didieryvron]

Posted by Speedy Builder5 on 07/05/2013 12:00:26:

Bonjour Didier,

I hope your problem is resolved soon. Which department do you live in ? We are in Lot (46) and find it difficult to find small quantities of material in France at reasonable prices. Many UK suppliers will send material, but of course the postage can be a bit expensive. We would be interested if you know of some good vendors.

Bob Humphrey.

I live in Bretagne, on l'Ile de Sein in Finistère. I nknow the problem to find material in France. I use Qualichutes et Blockenstok for steel Aluminium brass and bronze.

You are lucky in UK when I see the crowd of vendors of material and tools I think it's a paradise for model engineers and it's the reason why I buy the most part of my tools and castings in UK.

Regards

Didier

Edited By Didier Yvron on 07/05/2013 17:49:12

[JasonBModerator @jasonb]

Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J

[JasonBModerator @jasonb]

Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J

[Didier YvronParticipant @didieryvron]

Posted by JasonB on 07/05/2013 17:43:10:

Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J

Thanks JasonB, I will contact them next monday.

Regards

[Didier YvronParticipant @didieryvron]

Posted by JasonB on 07/05/2013 17:43:10:

Diane is likely to be out of the office most of this week, not sure about David so best to try him out of the two.

J

Thanks JasonB, I will contact them next monday.

Regards

[Didier YvronParticipant @didieryvron]

Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Thanks for the link. Don't worry for missunderstood, maybe my english is not perfect!!!

[Didier YvronParticipant @didieryvron]

Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Thanks for the link. Don't worry for missunderstood, maybe my english is not perfect!!!

[Didier YvronParticipant @didieryvron]

Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Oops I have not seen Simon0362 's answer

[Didier YvronParticipant @didieryvron]

Posted by Nicholas Farr on 07/05/2013 17:39:06:

Hi Didier, I do apologise, I've missunderstood your query.

Try Costomer Services, or one of the editors by email from the link below.

**LINK**

Regards Nick.

Oops I have not seen Simon0362 's answer

[Sub MandrelParticipant @submandrel]

Hi Didier,

Welcome to the forums!

Make sure that you have entered teh correct subscriber numbers – you will have a different number for each magazine.

Neil

[Sub MandrelParticipant @submandrel]

Hi Didier,

Welcome to the forums!

Make sure that you have entered teh correct subscriber numbers – you will have a different number for each magazine.

Neil

[Didier YvronParticipant @didieryvron]

Posted by Stub Mandrel on 07/05/2013 18:24:58:

Hi Didier,

Welcome to the forums!

Make sure that you have entered teh correct subscriber numbers – you will have a different number for each magazine.

Neil

Yes Neil, I have checked my numbers, no problem.

Thanks

Regards – Didier

[Author]

Posts