New member, N. Gloucestershire.

[Paul Wakefield 1Participant @paulwakefield1]

Hi from a long-term lurker on these forums. I’ve finally broken cover simply in order to pursue an item in the classified section… hopefully!

I’ve collected a lathe, a mill and a lot of hand tools over the years although my main interest has remained a fascination with things that fly, which is something I’ve been involved with since short trouser days.

Now, with more time on my hands I’d love to know more about how to set up the lathe and mill, although I have also found that tackling a specific job is a sure way to improve knowledge. The present mini-job on the Little John is a quill collar for the Mill to enable a DRO to be fitted. Prior to that it was four shuttle valves for a model vectored thrust system.

Time flies in the workshop!

Paulbw.

[Paul Wakefield 1Participant @paulwakefield1]

[Howard LewisParticipant @howardlewis46836]

Welcome!

As you already know lots of help available for almost any subject.

You may be able to help,others on here.

The Raglan Little John is a good machine. I've had dealings with a friends. Made him a four way toolpost to go on the Top Slide, so that he could change tools easily, even if he was taper turning.

Howard

[old martParticipant @oldmart]

Welcome, Paul, there are some very useful books to help you get on the right track, which the more knowledgable amongst us will be able to recommend.

[Steve NeighbourParticipant @steveneighbour43428]

Posted by Paul Wakefield 1 on 26/03/2021 16:34:16:

Hi from a long-term lurker on these forums. I’ve finally broken cover simply in order to pursue an item in the classified section… hopefully!

I’ve collected a lathe, a mill and a lot of hand tools over the years although my main interest has remained a fascination with things that fly, which is something I’ve been involved with since short trouser days.

Now, with more time on my hands I’d love to know more about how to set up the lathe and mill, although I have also found that tackling a specific job is a sure way to improve knowledge. The present mini-job on the Little John is a quill collar for the Mill to enable a DRO to be fitted. Prior to that it was four shuttle valves for a model vectored thrust system.

Time flies in the workshop!

Paulbw.

Hi Paul,

Sent you a PM

Steve

[Paul Wakefield 1Participant @paulwakefield1]

Thanks for the welcome Chaps. I’ll look forward to the journey of discovery to come.

Paulbw.

[noel shelleyParticipant @noelshelley55608]

Hello Paul, and welcome aboard. There are many here who will offer advice on most things – Just ask ! Noel.

[Brian HParticipant @brianh50089]

Hello Paul and welcome. Sounds like you're enjoying yourself.

Brian

[Henry BrownParticipant @henrybrown95529]

Welcome Paul, sound like you are fairly close to me, I'm near Pershore. Enjoy spending time with your projects…

[Paul Wakefield 1Participant @paulwakefield1]

Thanks again Gents. Yes, Pershore is just up the road from me Henry.

My latest project would appear to be to find a reliable removal company to move a newly purchased Lathe. Any hints would be gratefully received. The site search button doesn’t give any returns to my searches.

Paulbw.

[Henry BrownParticipant @henrybrown95529]

I don't have any contacts I'm afraid Paul. What weight is it? I installed a GH1322 (about 500kg) here by myself, if its that sort of size/weight drop me a pm via here, maybe we can sort something out…

[V8EngParticipant @v8eng]

Posted by Paul Wakefield 1 on 27/03/2021 17:30:40:

Thanks again Gents. Yes, Pershore is just up the road from me Henry.

My latest project would appear to be to find a reliable removal company to move a newly purchased Lathe. Any hints would be gratefully received. The site search button doesn’t give any returns to my searches.

Paulbw.

I have seen a company called Landylift recommended by people on this forum.

This is a link to their advert: Landylift

[Paul Wakefield 1Participant @paulwakefield1]

Thanks for your responses both. Weight is something in the order of 310Kg and it needs to be moved from Cumbria to here (Cheltenham).

I’ll have a look at Landylift thanks V8Eng and I’ll drop you a PM Henry.

Paulbw.

[Harry WilkesParticipant @harrywilkes58467]

Welcome to tthe forum

H

[Paul Wakefield 1Participant @paulwakefield1]

Posted by Harry Wilkes on 27/03/2021 21:17:12:

Welcome to tthe forum

H

Thanks Harry!

[Paul Wakefield 1Participant @paulwakefield1]

Again, thanks for all your help. V8Eng suggested I contact Landylift and my new-to-me Lathe duly arrived yesterday afternoon. Very professional service with no hiccups.

I am now reading the book of words before firing it up..!

Paulbw.

[Howard LewisParticipant @howardlewis46836]

Suggest that you contact the Cheltenham Society of Model Engineers, and join. In the not too distant future you will be able to meet folk with similar interests, some of whom will, be prepared to offer advice face to face and possibly demonstrate techniques.

Howard

[Author]

Posts