New member

[Arthur GoodwinParticipant @arthurgoodwin45738]

Hi

Being new to the forum I am here on an intro basis.

Not sure if this is the right place but here goes.

I worked all my life in production engineering with a few years on maintenance in the food industry.

Now retired I have set up my own workshop comprising of a Denford viceroy lathe 5", a clarke mini mill cmd10 a clarke drill press and grinding wheel.

Well tooled up and embarking on my first project which is the Trunch Trojan by Bob Williams.

[Arthur GoodwinParticipant @arthurgoodwin45738]

[Arthur GoodwinParticipant @arthurgoodwin45738]

Hi

Could anybody tell me how to upload a photo.

When I click the camera icon it opens another window which says browse albums and underneath it days no albums found.

Any advice please.

[Grindstone CowboyParticipant @grindstonecowboy]

Hi Arthur

You might find this posting useful, it's from the FAQ section of the forum and explains how to post pictures – basically you create an album first, add your photos to it, then you can use them in your post.

And welcome to the forum

Rob

[Howard LewisParticipant @howardlewis46836]

Welcome aboard!

Where are you located?

If you can find a M E Club near you, it would be worth joining. Once Covid 19 is over, you will be able to meet fellow enthusiasts, face to face. In this way, you will pick up tips (and possibly, some bad habits ) and occasionally be able to borrow a toll for an unusual one off job.

You will find a vast pool of expertise and experience on here, together with friendly banter.

Howard

[SteviegtrParticipant @steviegtr]

Welcome Arthur. Sounds like you have enough machinery there to start your project. Good luck with it & post pictures as you go.

Steve.

Edited By Neil Wyatt on 26/04/2020 19:29:23

[Brian HParticipant @brianh50089]

Welcome Arthur, please keep us up to date with progress and if you hit any problems, you know where to come.

Brian

Edited By Neil Wyatt on 26/04/2020 19:29:08

[Neil WyattModerator @neilwyatt]

Welcome to the forum, Arthur.

You managed to start two thread so I've combined them into one.

Neil

[Author]

Posts