Nemett Twin Engine

Advert

New Replies

Report Bug

Help/FAQs

Nemett Twin Engine

This topic has 11 replies, 7 voices, and was last updated 3 July 2011 at 17:52 by Steve Withnell.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
27 April 2010 at 18:01 #51193
David Clark 13
Participant
@davidclark13
Hi There

Has anyone got a set of drawings for the Nemett twin they could let me have a copy off.

Reasonable expenses paid.

Also, Malcolm I believe did a much smaller engine, possibly a twin a long time ago.

Was this ever written up in Model Engineer?

regards David
Advert

27 April 2010 at 18:01 #2269
David Clark 13
Participant
@davidclark13
27 April 2010 at 18:32 #51194
Rob Manley
Participant
@robmanley79788
I dont believe the drawings for the twin were ever published as the prototype was finished just before his passing? wasnt it? R.
27 April 2010 at 18:41 #51195
David Clark 13
Participant
@davidclark13
Hi There

I believe a few were sold before he passed on.

regards david
6 January 2011 at 14:19 #61861
Samsaranda
Participant
@samsaranda
Does anyone know where any of Nemett’s (Malcolm Stride) drawings for any of his I/C engines are available for sale?

D W
6 January 2011 at 16:37 #61871
JasonB
Moderator
@jasonb
As far as I know the plans are not commercially available, I have seen them come up on Homeworkshop but they are hard to find.

I have seen on another forum someone who previously made teh NE15 doing a opposed twin with supercharger and a lot of the parts ave verymuch Nemett based.

Jason
6 January 2011 at 17:09 #61873
LADmachining
Participant
@ladmachining
Ron Chernich's Model Engine News website – http://www.modelenginenews.org – for Jan 2011 features a Nemett Bobcat twin built by a Ron Palmer in Spain.

Maybe if you get in contact with Ron C, he can pass on the email address of the builder.

Anthony

Edited By Katy Purvis on 01/06/2015 09:39:29
6 January 2011 at 17:48 #61875
JasonB
Moderator
@jasonb
This is the direct link, scroll down a bit, nice looking engine.

J
26 June 2011 at 21:26 #70843
steve perry
Participant
@steveperry39997
we have the orignal prototype built by malcome himself.
26 June 2011 at 21:31 #70844
David Clark 13
Participant
@davidclark13
Hi Steve

But do you have a set of drawings?

How well does the engine run?

Was it water cooled?

regards David
26 June 2011 at 21:52 #70847
David Clark 13
Participant
@davidclark13
Hi There

I have found photos of it both air cooled and water cooled.

regards David
3 July 2011 at 17:52 #71298
Steve Withnell
Participant
@stevewithnell34426
I built my 15S from the Magazine articles, the quality of the series I felt made the plans redundant. That should be set in context of it being the first model to come out of my (then) new workshop and I had no worshop experience…It did run too! and is now a shelf ornament:

ME did publish some Alibre developed models of the twin version, but it was a straight extension of the single, so shouldn’t be an issue to build one.
Author

Posts