Mystery Collet Chuck

Advert

Mystery Collet Chuck

Home Forums Beginners questions Mystery Collet Chuck

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #45672
    John C
    Participant
      @johnc47954
      Can anyone identify this collet chuck and collet? The chuck is threaded for a Myford ML7/S7 splindle. The collet parallel portion is 0.960 ins outside diameter by 0.65 ins long. The overall length of the collet is 1.35 ins and the widest point is 1.28 ins dia. The collar of the chuck is 2.65 ins dia by 0.75 ins thick.
      I’ve looked on as many tool sites as I can find but there is nothing to identify this item. Any help is most gratefully received.

      Thanks,
       John

       
      Advert
      #4861
      John C
      Participant
        @johnc47954

        Unknown Collet Chuck for Myford Lathe

        #45673
        Richard Albrecht
        Participant
          @richardalbrecht60161



          I think it is a home made one, as it
          looks very similar to one i made about 15 years ago from an article
          in MEW
          Regards
          Richard
          #45674
          John C
          Participant
            @johnc47954
            Thanks Richard, that would explain it!  I take it you made the collets as well – I can’t find any off the shelf ones that would fit, and I only have the 3/4 one pictured.
            John
          Viewing 4 posts - 1 through 4 (of 4 total)
          • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

          Advert

          Latest Replies

          Home Forums Beginners questions Topics

          Viewing 25 topics - 1 through 25 (of 25 total)
          Viewing 25 topics - 1 through 25 (of 25 total)

          View full reply list.

          Advert

          Newsletter Sign-up