Myford ML10 Hammer Finish Green Paint

Myford ML10 Hammer Finish Green Paint

This topic has 1 reply, 1 voice, and was last updated 24 September 2013 at 21:07 by Rufus Roughcut.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
24 September 2013 at 21:07 #130630
Rufus Roughcut
Participant
@rufusroughcut
I Recently started sprucing up a ML10 with the Green Hammer finish and found the colour was not available from Myford, after much searching I found it to be Reseda Green Hammer finish from http://www.paints4trade.com

Hope this helps others, Also Myford now aware

Regards

Rufus
Advert

24 September 2013 at 21:07 #30461
Rufus Roughcut
Participant
@rufusroughcut
Info which may be of use
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Flattening brass plates
  Started by: t1krt in: Workshop Techniques
- 6
- 7
- 6 April 2025 at 11:03
  Dave Halford
- Chester DB10LB Lathe – Not starting
  Started by: David Deaville in: General Questions
- 2
- 3
- 6 April 2025 at 10:54
  David Deaville
- Supply company catalogues
  Started by: nevillet in: Workshop Tools and Tooling
- 5
- 5
- 6 April 2025 at 10:53
  Michael Gilligan
- Which type of single phase motors are best for constant use – power hacksaw
  Started by: ell81 in: Beginners questions
- 3
- 3
- 6 April 2025 at 10:50
  peak4
- Stripped aluminum threads. Now what? 1 2
  Started by: brucemc777 in: Beginners questions
- 19
- 35
- 6 April 2025 at 10:39
  howardb
- Problem getting the right parameters on a VFD
  Started by: Robert Graham in: Electronics in the Workshop
- 7
- 9
- 6 April 2025 at 10:26
  Robert Graham
- Damp proofing concrete floors
  Started by: Duff Machinist in: General Questions
- 13
- 14
- 6 April 2025 at 02:52
  Duff Machinist
- Machinery Handbook 1 2
  Started by: Dalboy in: Books
- 30
- 38
- 5 April 2025 at 22:31
  Huub
- Measuring increments on boring head
  Started by: Bill Phinn in: Workshop Techniques
- 15
- 20
- 5 April 2025 at 20:50
  JasonB
- Elliott Omnimill Quill Clamp
  Started by: dangermouse in: Manual machine tools
- 4
- 5
- 5 April 2025 at 20:27
  Paul Kemp
- How to wire up 3 phase motor and 3 phase converter?
  Started by: ell81 in: Beginners questions
- 7
- 15
- 5 April 2025 at 18:36
  Robert Atkinson 2
- Morse Key
  Started by: Steve Withnell in: Work In Progress and completed items
- 3
- 3
- 5 April 2025 at 18:20
  Mike Hurley
- My week this week! My workshop videos 1 2 … 11 12
  Started by: Phil Whitley in: The Tea Room
- 14
- 286
- 5 April 2025 at 16:00
  Phil Whitley
- Myford S7 Taistock Adjustment
  Started by: Harry Wilkes in: General Questions
- 9
- 12
- 5 April 2025 at 15:17
  Harry Wilkes
- James Coombes Drawing Error (or mine?)
  Started by: Steve Withnell in: Drawing Errors and Corrections
- 4
- 5
- 5 April 2025 at 10:51
  Steve Withnell
- Flexispeed Meteor 2
  Started by: ferroequinologist in: Manual machine tools
- 11
- 19
- 5 April 2025 at 07:01
  ferroequinologist
- What Did You Do Today 2025 1 2 3 4
  Started by: JasonB in: The Tea Room
- 23
- 78
- 4 April 2025 at 20:57
  Nigel Graham 2
- Powered hacksaw – blade lift for the return stroke
  Started by: Sonic Escape in: General Questions
- 8
- 17
- 4 April 2025 at 20:00
  Nicholas Farr
- New member old lathe
  Started by: t1krt in: Introduce Yourself – New members start here!
- 8
- 16
- 4 April 2025 at 19:52
  t1krt
- Tangential tooling 1 2
  Started by: Keith Matheson in: Workshop Tools and Tooling
- 13
- 29
- 4 April 2025 at 18:14
  Howard Lewis
- Which lathes have drawbars in the headstock? 1 2
  Started by: ell81 in: Beginners questions
- 17
- 26
- 4 April 2025 at 18:04
  Howard Lewis
- gear cutting with the shaper
  Started by: jacques maurel in: Workshop Techniques
- 5
- 6
- 4 April 2025 at 15:15
  Andrew Tinsley
- Electric motor vibrations
  Started by: Sonic Escape in: General Questions
- 8
- 12
- 4 April 2025 at 07:38
  JasonB
- Build Your Own Metal Working Shop From Scrap (7 book series)
  Started by: Dr_GMJN in: Books
- 6
- 7
- 4 April 2025 at 06:39
  Pete
- Scraping
  Started by: ryan.carter848 in: Books
- 7
- 10
- 4 April 2025 at 05:11
  Pete

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

April 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies