Metric Wiggler ?

Metric Wiggler ?

This topic has 2 replies, 2 voices, and was last updated 28 October 2009 at 00:25 by John Stevenson 1.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
27 October 2009 at 23:49 #44547
Tony Ray
Participant
@tonyray65007
Can anyone tell me where I can get a metric wiggler – there are loads of imperial ones around but it seems a bit daft to have to use an imperial one on a metric mill.

Thanks

Tony
Advert

27 October 2009 at 23:49 #4809
Tony Ray
Participant
@tonyray65007
28 October 2009 at 00:25 #44548
John Stevenson 1
Participant
@johnstevenson1
Not a wiggler as such but Arceurotrade do two metric edge finders that can be used as a wiggler.

John S.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Gas Engine Needle Valve
  Started by: Chris V in: General Questions
- 5
- 7
- 23 April 2025 at 13:55
  Chris V
- Half Scale 1/4HP A J Weed Engine
  Started by: JasonB in: Stationary engines
- 4
- 16
- 23 April 2025 at 13:52
  JasonB
- original benz
  Started by: tom hardy in: General Questions
- 2
- 2
- 23 April 2025 at 11:50
  JasonB
- CNC Coolant
  Started by: Steve355 in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 8
- 23 April 2025 at 11:38
  JasonB
- Reeves acquires Hemingway Tools?
  Started by: derek hall 1 in: The Tea Room
- 3
- 3
- 23 April 2025 at 11:14
  Howard Lewis
- Geography lesson required? Crossley Engine
  Started by: duncan webster 1 in: The Tea Room
- 10
- 15
- 23 April 2025 at 11:07
  Howard Lewis
- Hemingway Myford Top Slide Question
  Started by: Nicholas Hill in: General Questions
- 8
- 11
- 23 April 2025 at 10:33
  halfnut
- 50,000 Ton Press
  Started by: Vic in: The Tea Room
- 8
- 17
- 23 April 2025 at 10:29
  halfnut
- LMS 2F Experiences
  Started by: Bryan Cedar 1 in: Locomotives
- 6
- 9
- 23 April 2025 at 10:28
  noel shelley
- J & S grinder – electrics
  Started by: gerry madden in: Manual machine tools
- 6
- 7
- 23 April 2025 at 10:06
  John Hinkley
- First 3D metal Printed Part
  Started by: JasonB in: 3D Printers and 3D Printing
- 13
- 21
- 23 April 2025 at 07:04
  JasonB
- Building Bernard Tekippe’s Precision Regulator 1 2
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 10
- 44
- 22 April 2025 at 22:20
  Chris Raynerd 2
- Model Turbines 1 2 … 23 24
  Started by: Turbine Guy in: Stationary engines
- 28
- 600
- 22 April 2025 at 21:59
  Turbine Guy
- Warco WM12 “flex”
  Started by: michaeljf93 in: Beginners questions
- 11
- 14
- 22 April 2025 at 20:51
  KEITH BEAUMONT
- Solar panel lighting problem
  Started by: KEITH BEAUMONT in: Electronics in the Workshop
- 6
- 13
- 22 April 2025 at 20:47
  KEITH BEAUMONT
- UPVC Exterior door slamming
  Started by: Glyn Davies in: The Tea Room
- 11
- 13
- 22 April 2025 at 20:31
  Keith Petley
- VFD Article in May issue 351 1 2
  Started by: Robert Atkinson 2 in: Model Engineer & Workshop
- 12
- 27
- 22 April 2025 at 19:29
  Emgee
- Generator size for vfd controlled 3 phase 5.5 kw motor 1 2
  Started by: PutneyChap in: Electronics in the Workshop
- 12
- 50
- 22 April 2025 at 19:13
  Stuart Smith 5
- What Did You Do Today 2025 1 2 3 4
  Started by: JasonB in: The Tea Room
- 26
- 89
- 22 April 2025 at 17:01
  Pete.
- Stopping milling chips going everyehere 1 2
  Started by: petro1head in: General Questions
- 22
- 38
- 22 April 2025 at 16:50
  Andrew Crow
- Crewe model locomotive engineer.
  Started by: dave22 in: General Questions
- 1
- 1
- 22 April 2025 at 11:09
  dave22
- Clarify some plain bearing engineering principles please.
  Started by: samuel heywood in: General Questions
- 13
- 23
- 22 April 2025 at 11:06
  Nicholas Farr
- Power tapping on the sx2p??
  Started by: samuel heywood in: Manual machine tools
- 4
- 5
- 22 April 2025 at 09:45
  Howi
- Hello from Sussex
  Started by: renardiere7 in: Introduce Yourself – New members start here!
- 3
- 4
- 21 April 2025 at 22:14
  renardiere7
- Motor to lead screw coupling method 1 2
  Started by: nevillet in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 17
- 28
- 21 April 2025 at 21:15
  John Haine

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

May 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies