LBSC Netta

[Perko7Participant @perko7]

[Perko7Participant @perko7]

Hi, wondering if anyone would have a copy of ME Issue 2770 Volume 110 1954 which describes the cylinders for the 5inch gauge Netta. I am building something similar and would like to use a published design for the cylinders rather than try to invent one. Happy for scanned pages rather than posting to Australia. Thanks.

[Nicholas FarrParticipant @nicholasfarr14254]

Hi Perko7, PM me your e-mail address and I can send you a PDF scan.

Regards Nick.

[Ady1Participant @ady1]

These will get you started if you're waiting for bits

[Perko7Participant @perko7]

Thanks gents, those copies from Ady1 are all that I need. Could not work out how the plumbing connected to the steamchest and what size the connections would be. Working from an original General Arrangement drawing of the loco I'm building and scaling down the full-size arrangement was never going to work. Will post some photos when I get to that stage, still preparing drawings so I know how much metal I need to trim away.

[Author]

Posts