It’s About Time!

Advert

It’s About Time!

Home Forums Exhibitions, Shows and Club Events It’s About Time!

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #588715
    jaCK Hobson
    Participant
      @jackhobson50760

      2022

      We had to cancel the last one because of Covid so this is a celebration of the new normal!

      Free tea/coffee and cake. (No hog roast this time – a casualty of Covid )

      Lots of displays that would be interesting to many on this forum. Workshop guided tour this time! I'm planning to have my 3D printer there so not just strictly horology.

      I would guess this won't be as busy as last time but hopefully that gives more opportunity to 'engage', chat with exhibitors, 'have a go' etc.

      Train station 50 yards away. Not far from J6 on M25. There is easy local parking for an hour or so.

      Advert
      #4597
      jaCK Hobson
      Participant
        @jackhobson50760

        Horology open day, Caterham, nr J6 M25

        #588717
        Ady1
        Participant
          @ady1

          Bet ya it's mobbed, people are fed up of being kept under house arrest

          The people who wanted to hide were always going to isolate anyway

          The missus is at Crufts with all the mad dog people this weekend

          #588721
          Michael Gilligan
          Participant
            @michaelgilligan61133

            Great news, Jack yes

            Regrettably too far for me to travel … but I wish you well.

            MichaelG.

            #588728
            jaCK Hobson
            Participant
              @jackhobson50760

              As a bit or marketing, which I'm not good at, this is run by the 'South London Branch' of the BHI, which is one of the largest branches. I'm lucky to rub shoulders with world experts in their field… and there seems to be strong correlation between success and just being really nice to talk to. For pedigree, George Daniels was a founder and former president.

              #595265
              jaCK Hobson
              Participant
                @jackhobson50760

                I'm going to be showing off 3D printing on my table… Lots of other better exhibits. Should be a good day and maybe worth up to an hours commute – you will be able to spend more than an hour at the event without getting bored.

                #595270
                John Haine
                Participant
                  @johnhaine32865

                  I think the marketing would be more effective if the SLB actually had an advert on their website! Unless someone can send me a link to an actual mention rather than a page saying the 2021 Open Day has been cancelled? Nor is the event listed on the main BHI site!

                  #595277
                  Clive Steer
                  Participant
                    @clivesteer55943

                    If I remember correctly there is limited parking available at Soper Hall and although there are Morrisons and Waitrose carparks nearby these may have conditions attached. So anyone knows where parking may be found that would be helpful.

                    CS

                    #595282
                    JasonB
                    Moderator
                      @jasonb

                      You can park for a couple of hours in the Morrisons for free and don't have to buy anything from them.

                      #595283
                      jaCK Hobson
                      Participant
                        @jackhobson50760

                        I think morrisons etc is fine for most visitors – I think 3 hour limit. Worst case, move the car from one to other – 6 hours!

                        If disabled then talk to the people at the soper hall barrier and you might get special treatment.

                        Unlimited parking is available up the road… but it is a bit less than a mile to walk back

                         

                        Sorry about the website. That is an oversight

                        Edited By jaCK Hobson on 21/04/2022 12:25:29

                        #595483
                        Iain Downs
                        Participant
                          @iaindowns78295

                          I don't suppose there is anything like this up north?

                          Iain

                          #595769
                          jaCK Hobson
                          Participant
                            @jackhobson50760

                            What a fun day! Not as busy as previous years but that meant that the visitors could really engage. I didn't get a chance to take a break so managed to bore many people with long explanations of active damping applied to my 3d printer.

                            I don't think there is anything quite like this anywhere else. The South London Branch of the BHI is probably the biggest. I'll try and give more warning next time…

                          Viewing 12 posts - 1 through 12 (of 12 total)
                          • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                          Advert

                          Latest Replies

                          Viewing 25 topics - 1 through 25 (of 25 total)
                          Viewing 25 topics - 1 through 25 (of 25 total)

                          View full reply list.

                          Advert

                          Newsletter Sign-up