Invertor manual

Invertor manual

This topic has 6 replies, 2 voices, and was last updated 25 November 2014 at 21:14 by Boiler Bri.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
25 November 2014 at 20:34 #31767
Boiler Bri
Participant
@boilerbri
Advert

25 November 2014 at 20:34 #170698
Boiler Bri
Participant
@boilerbri
I have removed three inverters from a control panel that had become redundant. They are: .37 to .75kw single to three phase units.

Make is Telemecanique Altivar 28

I have searched the net for a manual but cannot find them.

Does anyone have a manual for them that i could copy?

I will pay the postage if required.

Brian

Edited By Boiler Bri on 25/11/2014 20:35:40
25 November 2014 at 20:46 #170701
Graham Wharton
Participant
@grahamwharton
http://www.inverter.co.uk/applications/manuals&datasheets/Telemecanique-Altivar28-manual.pdf
25 November 2014 at 20:47 #170702
Graham Wharton
Participant
@grahamwharton
https://stevenengineering.com/tech_support/PDFs/45A28AC.pdf
25 November 2014 at 20:55 #170704
Boiler Bri
Participant
@boilerbri
Wow that's quick. Thanks. I found it from my lap top but my tablet would not bring anything up.

Many thanks.

Bri
25 November 2014 at 21:02 #170706
Graham Wharton
Participant
@grahamwharton
Ive got the Altivar 18 1.5kW on my mill. It never misses a beat. Great little inverters.

You can also find service manuals for them if you look hard enough, although a quick look i couldn't find one for the 28.

Graham
25 November 2014 at 21:14 #170708
Boiler Bri
Participant
@boilerbri
Thanks Graham, guys above found the manual from me.

Brian
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- New Myford Owner with Problems!!!
  Started by: Richard Bartholomew 3 in: Introduce Yourself – New members start here!
- 6
- 6
- 20 February 2025 at 13:14
  jim1956
- indexing head lathe
  Started by: Danni Burns in: Manual machine tools
- 11
- 22
- 20 February 2025 at 13:13
  Danni Burns
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 50
- 151
- 20 February 2025 at 13:00
  parovoz
- SHARP PRACTICE ?
  Started by: Speedy Builder5 in: The Tea Room
- 6
- 9
- 20 February 2025 at 12:45
  howardb
- What Do These Mean; Why So Many Loop Errors? (Alibre Atom) 1 2
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 8
- 28
- 20 February 2025 at 12:29
  David Jupp
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 10 11
  Started by: Neil Wyatt in: Model Engineer.
- 67
- 257
- 20 February 2025 at 12:06
  dc1
- Lathe help information
  Started by: maccecht in: Help and Assistance! (Offered or Wanted)
- 9
- 15
- 20 February 2025 at 11:52
  Martin of Wick
- A Marine Condensing Engine 1 2 … 5 6
  Started by: Ramon Wilson in: Work In Progress and completed items
- 26
- 128
- 20 February 2025 at 10:50
  Zan
- Telephone call-blocking
  Started by: Michael Gilligan in: The Tea Room
- 6
- 10
- 20 February 2025 at 10:25
  Andrew Crow
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 9
- 15
- 20 February 2025 at 10:06
  Emgee
- Myford ML10
  Started by: notyet in: Workshop Tools and Tooling
- 4
- 5
- 20 February 2025 at 09:18
  Andrew Crow
- PocketMags Latest Issues 1 2
  Started by: doubletop in: Subscription issues and Digital magazines
- 5
- 27
- 20 February 2025 at 08:27
  doubletop
- back issues
  Started by: duncan webster 1 in: Subscription issues and Digital magazines
- 2
- 3
- 20 February 2025 at 07:41
  JasonB
- DTI wall clock
  Started by: jimmy b in: The Tea Room
- 7
- 8
- 20 February 2025 at 04:35
  jimmy b
- The Latest INDEX to Model Engineer & Workshop (Also past issues of MEW) 1 2
  Started by: David Frith in: Model Engineer & Workshop
- 7
- 33
- 20 February 2025 at 03:21
  Michael Gilligan
- Bit of a con or sharp practice on water filters.
  Started by: Robert Atkinson 2 in: The Tea Room
- 15
- 23
- 19 February 2025 at 23:36
  duncan webster 1
- Had Another Go 1 2 … 14 15
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 359
- 19 February 2025 at 22:51
  Nigel Graham 2
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD!
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 2
- 3
- 19 February 2025 at 22:22
  garyash
- Sieg KX3 spindle motor replacement/upgrade
  Started by: Beardy Mike in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 7
- 11
- 19 February 2025 at 21:43
  Beardy Mike
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 5
- 19 February 2025 at 21:39
  celso ari schlichting
- Searching for 125mmish cast iron handweels with 1″ bore
  Started by: pgrbff in: Workshop Tools and Tooling
- 9
- 18
- 19 February 2025 at 20:09
  not done it yet
- Aircraft General Discussion 1 2 … 80 81
  Started by: John Olsen in: The Tea Room
- 207
- 2,012
- 19 February 2025 at 17:10
  Robert Atkinson 2
- Securing smokebox number plate
  Started by: Derek Drover in: General Questions
- 9
- 14
- 19 February 2025 at 15:50
  duncan webster 1
- Selecting a Start & Run Capacitor for a 2850rpm mains induction motor
  Started by: Greensands in: Help and Assistance! (Offered or Wanted)
- 3
- 3
- 19 February 2025 at 12:41
  Robert Atkinson 2
- Changes to Well-Known Auction Site 1 2
  Started by: Chris Crew in: The Tea Room
- 23
- 31
- 19 February 2025 at 12:41
  Steve F

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies