Identify this attachment?

Advert

Identify this attachment?

Home Forums Workshop Tools and Tooling Identify this attachment?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #611563
    Pete Rimmer
    Participant
      @peterimmer30576

      Can anyone identify this attachment please?

      I expect it's a part from a T&C grinder or similar. It has a 5/16" collet frozen into the end. The locking lever prevents the collet sleeve from turning otherwis it's free to rotate. I suspect that the knurled wheel on the rear is what pulls the collet in but I cannot be sure.

      Pics below or you can view the album for full size ones.

      Thanks

      Pete.

      Advert
      #20776
      Pete Rimmer
      Participant
        @peterimmer30576
        #611795
        Robert Butler
        Participant
          @robertbutler92161

          Bump!

          #611925
          Pete Rimmer
          Participant
            @peterimmer30576

            Here's another part. Obviously it's an 8-postion stop but can anyone identify the purpose? i'm guessing it's milling machine or capstan lathe.

            Anyone recognise it?

            #612105
            Bill Davies 2
            Participant
              @billdavies2

              Hi, Pete.

              I think it may be off a capstan lathe, as you suggest. I operated one, too many decades ago, so my memory is a bit faded.

              Bill

            Viewing 5 posts - 1 through 5 (of 5 total)
            • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

            Advert

            Latest Replies

            Viewing 25 topics - 1 through 25 (of 25 total)
            Viewing 25 topics - 1 through 25 (of 25 total)

            View full reply list.

            Advert

            Newsletter Sign-up