Hi is Dennis

Hi is Dennis

This topic has 3 replies, 3 voices, and was last updated 25 July 2019 at 15:44 by Neil Wyatt.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
24 July 2019 at 09:28 #40582
Dennis Lodge
Participant
@dennislodge24507
A New Member
Advert

24 July 2019 at 09:28 #420699
Dennis Lodge
Participant
@dennislodge24507
Hi,

I restore motorbikes and have an old Harrison L6 but am considering a mini lathe, a Perris, Cowells or Warco Mini super. Any advice please?

Also I am reasonable on pc. I restore dinkys. I do digital photography and have spent to much on cameras.

Also I build but for display only O gauge engines, also I follow steam engines/trains.

Too many hobbies.

Regards

Dennis
25 July 2019 at 12:35 #420888
Howard Lewis
Participant
@howardlewis46836
Welcome!

Another with a variety of Engineering interests.

Where are you in the world?

There may be others nearby with whom you can chat / collaborate.

Howard
25 July 2019 at 15:44 #420920
Neil Wyatt
Moderator
@neilwyatt
Hi Dennis,

Welcome to the forum,

There's some variation in the capacities of those lathes; give some thought to what the largest piece of work you might want to do is.

Neil
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 13
- 18
- 27 February 2025 at 11:50
  John MC
- Scam – Close but no Cigar!
  Started by: Chris Crew in: The Tea Room
- 3
- 3
- 27 February 2025 at 10:26
  Tony Pratt 1
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 3
- 3
- 27 February 2025 at 09:54
  Dave Halford
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 4
- 4
- 27 February 2025 at 09:38
  Dave Halford
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 5
- 6
- 27 February 2025 at 09:29
  Michael Gilligan
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 13
- 18
- 27 February 2025 at 09:19
  Michael Gilligan
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 5
- 27 February 2025 at 09:06
  michael howarth 1
- What steel
  Started by: Peter Simpson 3 in: Beginners questions
- 5
- 6
- 27 February 2025 at 08:48
  Hollowpoint
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 6
- 8
- 27 February 2025 at 08:43
  Hollowpoint
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 7
- 9
- 27 February 2025 at 06:57
  JasonB
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 8
- 27 February 2025 at 06:56
  Plasma
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 39
- 26 February 2025 at 20:33
  Fulmen
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 7
- 26 February 2025 at 20:32
  celso ari schlichting
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 67
- 26 February 2025 at 18:41
  JasonB
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 4
- 4
- 26 February 2025 at 18:21
  Dave S
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 35
- 26 February 2025 at 18:14
  bernard towers
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 5
- 9
- 26 February 2025 at 17:30
  robin coleman
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 286
- 26 February 2025 at 16:14
  Michael Gilligan
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 2
- 26 February 2025 at 13:18
  Peter Cook 6
- New Member Paul
  Started by: paul richardson 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 26 February 2025 at 12:13
  JasonB
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD!
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 9
- 24
- 26 February 2025 at 10:58
  Nicholas Farr
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 10
- 23
- 26 February 2025 at 09:36
  rjenkinsgb
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 13
- 31
- 26 February 2025 at 09:12
  Michael Gilligan
- Metal spinning a deep cup
  Started by: Oily Rag in: Workshop Techniques
- 13
- 15
- 26 February 2025 at 08:58
  Trevor Drabble 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies