Hi all, new member from Southampton

[Raymond EvansParticipant @raymondevans66575]

[Raymond EvansParticipant @raymondevans66575]

I've a ML7 with vfd and dro recently added. Have not done a lot with it yet(health issues) and it's getting ready for a move to Wales – does it need a passport.

[David George 1Participant @davidgeorge1]

Hi welcome to the forum what are you interested in and where in Wales are you moving to, it depends on wether there is a custom point on the severn bridge in the near future wether you need a passport.

David

[Brian HParticipant @brianh50089]

You should be at home in Wales with a name like yours! All the best with the move.

Brian

[Raymond EvansParticipant @raymondevans66575]

Many thanks for good lucks.So far have leveled lathe properly and tested it with round bar and test piece.Interested in steam models like the the Stuart range and workshop tooling,eg Hemingway. Have already got V10, and rear toolpost kits to start.Will have to wait for move to be over and conversion of dry garage before starting. Going to bungalow near Newcastle Emlyn,West Wales.

Ray

[Chris Evans 6Participant @chrisevans6]

Welcome along and good luck with the move from another Evans.

[Author]

Posts