help with fusion 360

[geoff adamsParticipant @geoffadams14047]

been doing battle with fusion 360 found some good tutorials went all through

them and produced the part, went on to draw my own part this where it all went wrong get so far ,don't no what to do

anyone in the Hampshire dorset area that could help me out on a one to one

or over the phone

thanks Geoff

[geoff adamsParticipant @geoffadams14047]

[Swarf MakerParticipant @swarfmaker85383]

I have sent you a personal message. Check your inbox (top row in the green banner) when convenient.

[Dean da SilvaParticipant @deandasilva59410]

Titans of CNC academy.
Wonderful website, has tons of stuff.

[BazyleParticipant @bazyle]

Posted by Dean da Silva on 16/12/2017 04:14:47:

Titans of CNC academy.
Wonderful website, has tons of stuff.

Titans of CNC academy.

Thanks for that. another excuse not to go out in the cold for 8 minutes.

[EmgeeParticipant @emgee]

Dean and Bazyle

Thanks for the link info, really comprehensive how to with Fusion Tutorial, straight talking no nonsense Videos,

Emgee

[MuzzerParticipant @muzzer]

Also check out Lars Christensen who works for Autodesk. His Youtube vids are aimed at various levels of expertise including absolute beginners.

There is also a Fusion 360 (official) channel and of course John Saunders has an excellent range of video tutorials including those aimed at beginners.

I found some of Titan Gilroy's early semi-political rants a bit offputting ("the american worker has been SOLD OUT" etc) but now he has focussed on helping people to pick up Fusion, I've warmed to him a bit more. His heart is in the right place and when you look past his vast ego, there is a lot to be found.

Murray

[EmgeeParticipant @emgee]

Posted by Muzzer on 16/12/2017 13:17:25:

Also check out Lars Christensen who works for Autodesk. His Youtube vids are aimed at various levels of expertise including absolute beginners.

I found some of Titan Gilroy's early semi-political rants a bit offputting ("the american worker has been SOLD OUT" etc) but now he has focussed on helping people to pick up Fusion, I've warmed to him a bit more. His heart is in the right place and when you look past his vast ego, there is a lot to be found.

Murray

Agree your comments but have seen so far that Lars is showing the CAD correct method of use but Titan is demonstating his machining know how more than his CAD drawing ability.
This has to be expected considering their backgrounds, both very informative.

Emgee

[Russell EberhardtParticipant @russelleberhardt48058]

Personally I found this written guide easier to follow than the videos:

**LINK**

https://forums.autodesk.com/autodesk/attachments/autodesk/124/104279/1/Fusion360Manual2017.zip

Russell

[thomas oliver 2Participant @thomasoliver2]

I have been following Lars on YouTube and he is OK, but his No1 beginners video was a bit hard to follow . He later apologised with another video for missing out vital commands, so make sure you watch that one if you are interested.

[EmgeeParticipant @emgee]

Posted by Russell Eberhardt on 16/12/2017 15:25:38:

Personally I found this written guide easier to follow than the videos:

**LINK**

Russell

Always good to have a manual, thanks for the link.

Emgee

[Gary WoodingParticipant @garywooding25363]

THIS YouTube channel is produced by AutoDesk.

Although primarily designed as a series of monthly challenges, the solutions are very well produced, with explicit instructions and objectives given for every step. There is no need to join or to submit your own solution – just watch the official solutions.

Each bite-sized challenge consists of modelling a simple 3D object, the creation of which often requires the use of a particular, non-obvious, F360 technique or command.

I've found it to be one of the very best F360 teaching aids I've found.

[Author]

Posts