Hello from Welwick

Advert

New Replies

Report Bug

Help/FAQs

Hello from Welwick

This topic has 8 replies, 6 voices, and was last updated 30 March 2018 at 23:05 by David Ward 7.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
27 March 2018 at 23:52 #40292
David Ward 7
Participant
@davidward7
Advert

27 March 2018 at 23:52 #347829
David Ward 7
Participant
@davidward7
Semi retired .

Did engineering from leaving school till 21 could not wait to get out! now I can not wait to get on the lathe!

Interested in making duplicating machine to carve wood….any help with this would be great.

I do some parts for air rifles and have managed to sell a few bits to pay for more tooling.

I have 45 ft ( note the proper measurement !! ) container full of stuff.
28 March 2018 at 23:30 #347964
David George 1
Participant
@davidgeorge1
Hi David welcome to the forum copy machine sounds interesting and what sort of stuff is in a 45ft container.

David
28 March 2018 at 23:33 #347965
JohnF
Participant
@johnf59703
Welcome David I'm sure you will enjoy this very active forum, do take care with making air rifle parts — make sure none are to increase the power beyond the legal limit of 12ft/lbs of energy.

Cheers John
29 March 2018 at 19:34 #348035
Neil Wyatt
Moderator
@neilwyatt
Hello David, welcome to the forum.

Neil
29 March 2018 at 19:35 #348036
martin ranson 2
Participant
@martinranson2
David … there is, or was, a Model Engineering society in Hull who are not too far away, they may be able to help.

martin
29 March 2018 at 20:41 #348042
Grindstone Cowboy
Participant
@grindstonecowboy
Funnily enough, I was only looking at a duplicating machine the other day **LINK**

Shouldn't be beyond the capabilities of most of us to construct something similar for less than they are asking.

Regards,

Rob
30 March 2018 at 23:04 #348209
David Ward 7
Participant
@davidward7
Posted by JohnF on 28/03/2018 23:33:36:

Welcome David I'm sure you will enjoy this very active forum, do take care with making air rifle parts — make sure none are to increase the power beyond the legal limit of 12ft/lbs of energy.

Cheers John

Thanks John

Most of the parts I are are for holding…barrel clamps and rails for scopes and some internal parts for triggers and cocking aids.

Non are made or could be modified to up the power above the legal limit.

Nice to know that some one picked up on my thread!

I will be building a .25 airgun that will be capable of over 150 ft/lbs but this is on my FAC so within the law.
30 March 2018 at 23:05 #348210
David Ward 7
Participant
@davidward7
Posted by Rob Rimmer on 29/03/2018 20:41:09:

Funnily enough, I was only looking at a duplicating machine the other day **LINK**

Shouldn't be beyond the capabilities of most of us to construct something similar for less than they are asking.

Regards,

Rob

Well it is not that one! mine will be cross between two Gemini and clone
Author

Posts