Hello, from the States

Hello, from the States

This topic has 10 replies, 9 voices, and was last updated 5 January 2022 at 06:36 by Former Member.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
24 December 2021 at 01:21 #576483
Jim Martin 1
Participant
@jimmartin1
Hello all. Retirement is here and I have been collecting steam engine projects for a number of years. I have built a Stuart 10v and dynamo so far. I just need a suitable street lamp to complete a little display. I will be posting pics of boilers and engines I will need help identifying that need repairs. I've been following Keith Appleton and a couple others awhile now. I look forward to talking to many of you in the future.
Advert

24 December 2021 at 01:21 #41198
Jim Martin 1
Participant
@jimmartin1
24 December 2021 at 08:20 #576494
Brian H
Participant
@brianh50089
Hello Jim and welcome to this wonderful Forum.

If you have any questions at all you have but to ask them here and someone will be along with the answer.

Have a Happy Christmas and an excellent New Year.

Brian (almost in the exact centre (center) of England)
24 December 2021 at 08:44 #576495
David George 1
Participant
@davidgeorge1
Hi Jim welcome to the forum. Just ask on here and someone will have a suggestion or some knowledge, perhaps you may have some to share.

Here is a picture of my simple steam engine and lamp post I made perhaps you can make your own.

David

Edited By David George 1 on 24/12/2021 08:45:33
24 December 2021 at 10:09 #576506
vic newey
Participant
@vicnewey60017
Welcome Jim, for street lamp Look under 12th scale street lamps as under miniature/dollhouse items
24 December 2021 at 11:18 #576534
noel shelley
Participant
@noelshelley55608
Welcome to the party Jim, if you have a question someone on here will have an answer for you. Merry Christmas and a Happy New Year. Noel.
24 December 2021 at 14:05 #576571
Steviegtr
Participant
@steviegtr
Welcome Jim & Merry Christmas.

Steve.
24 December 2021 at 14:19 #576574
Howard Lewis
Participant
@howardlewis46836
Welcome to the Forum Jim.

Lots of good company and advice on here.

Merry Christmas and a Happy New Year

Howard
24 December 2021 at 15:55 #576584
Harry Wilkes
Participant
@harrywilkes58467
Welcome to the forum Jim

H
25 December 2021 at 00:08 #576666
Jim Martin 1
Participant
@jimmartin1
Thank you all, and Merry Christmas to all of you.
5 January 2022 at 06:36 #578540
Former Member
Participant
@formermember37818
[This posting has been removed]
Author

Posts

Viewing 11 posts - 1 through 11 (of 11 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Eastern European Steam
  Started by: parovoz in: Introduce Yourself – New members start here!
- 6
- 6
- 4 February 2025 at 21:37
  Nigel Graham 2
- The most difficult project?
  Started by: Tony Martyr in: Stationary engines
- 3
- 9
- 4 February 2025 at 21:08
  Chris Gunn
- Pennsylvania A3 Switcher 1 2 3
  Started by: Mark Elen 1 in: Work In Progress and completed items
- 18
- 58
- 4 February 2025 at 17:52
  Mark Elen 1
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 6
- 24
- 4 February 2025 at 17:50
  David George 1
- Small butane torch refilling.
  Started by: YouraT in: Workshop Tools and Tooling
- 8
- 8
- 4 February 2025 at 17:50
  Graham Titman
- The wonders of AI… 1 2
  Started by: Robin Graham in: The Tea Room
- 15
- 42
- 4 February 2025 at 15:42
  Russell Eberhardt
- ZYTO mini Lathe – need help!
  Started by: theshonkymachinist in: Beginners questions
- 10
- 13
- 4 February 2025 at 15:21
  Nicholas Farr
- Email messages on the Forum.
  Started by: Andrew Tinsley in: General Questions
- 3
- 8
- 4 February 2025 at 14:38
  David Jupp
- Myford Topslide base casting graduations
  Started by: Martin Kyte in: Workshop Tools and Tooling
- 8
- 19
- 4 February 2025 at 11:11
  Martin Kyte
- 1911 Harley Davidson 7D twin
  Started by: Luker in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 4 February 2025 at 05:29
  Luker
- question about correcting error introduced by using straight slide in valve gear
  Started by: Chris Kaminski in: Locomotives
- 5
- 19
- 4 February 2025 at 05:03
  Chris Kaminski
- Bassett Lowke “Eclipse”
  Started by: JasonB in: Stationary engines
- 6
- 16
- 3 February 2025 at 20:57
  Jim Nic
- Alibre Workshop/Meshcam pro
  Started by: Ian McVickers in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 5
- 8
- 3 February 2025 at 19:21
  JasonB
- What Did You Do Today 2025 1 2
  Started by: JasonB in: The Tea Room
- 19
- 49
- 3 February 2025 at 18:07
  Bo’sun
- Robert Atkinson will be proud of me :) 1 2
  Started by: Michael Gilligan in: Electronics in the Workshop
- 19
- 33
- 3 February 2025 at 11:52
  John MC
- Had Another Go 1 2 … 14 15
  Started by: Nigel Graham 2 in: CAD – Technical drawing & design
- 22
- 356
- 3 February 2025 at 07:49
  David Jupp
- A New Scam Format?
  Started by: Nigel Graham 2 in: The Tea Room
- 4
- 6
- 2 February 2025 at 21:54
  Vic
- NEW LOOK – Model Engineer & Workshop 1 2 3 4
  Started by: sohara in: Model Engineer & Workshop
- 36
- 95
- 2 February 2025 at 18:33
  Graham Titman
- Classical architectural detail..
  Started by: Diogenes in: Books
- 2
- 5
- 2 February 2025 at 16:31
  Michael Gilligan
- Build Your Own Metal Working Shop From Scrap (7 book series)
  Started by: Dr_GMJN in: Books
- 5
- 6
- 2 February 2025 at 13:54
  noel shelley
- Stuart Beam Engine
  Started by: Phil P in: Help and Assistance! (Offered or Wanted)
- 2
- 3
- 2 February 2025 at 12:55
  Phil P
- Square Bed Lathe
  Started by: Clive Foster in: Manual machine tools
- 6
- 8
- 2 February 2025 at 12:29
  bernard towers
- Using Schneider ATV12 with remote terminal VW3A1006.
  Started by: chrismac in: Workshop Tools and Tooling
- 5
- 18
- 2 February 2025 at 11:48
  chrismac
- Totally unacceptable treatment
  Started by: Me. in: General Questions
- 13
- 25
- 2 February 2025 at 11:33
  Vic
- CAD – Target Enigma 1 2 3 4
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 17
- 78
- 2 February 2025 at 10:20
  SillyOldDuffer

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

February 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies