Hello from The Oily Rag

[Anonymous]

Inroduction

[Christopher BasonParticipant @christopherbason68648]

Welcome along – being a non club type myself I know you will find a niche here. I' m a complete tyro and have felt at home already, albeit in a solely "observatory" capacity!!!

[Brian HParticipant @brianh50089]

Welcome Ian, I'm sure you will find lots to interest you on here and answers to any questions you may have.

Hope the house move goes as smoothly as possible and you are back in a workshop quickly.

Brian

[Neil WyattModerator @neilwyatt]

Welcome to the forum Ian,

Neil

[Howard LewisParticipant @howardlewis46836]

The one problem with not being a club member is that although you can get excellent advice from all over the world, but if you need a British Standard Brass tap, or something of the like, for a one off job, you don't have a mate across town or at the end of the road who will lend you one, or will machine something a bit too big for your machines!

Been there and done it, from both ends!

Howard

[Author]

Posts