heat treatment oven

[david greggParticipant @davidgregg87136]

pyrometer for a Gallenkamp FR 520

[david greggParticipant @davidgregg87136]

Ihave a Gallenkamp FR520 heat treatment oven  and I require a pyrometer  I have tried the company who have taken over Gallenkamp but all they can tell is that this is an old model which is out of production ,I have also tried an add in scribe a line but with no success , has anybody  out there any suggestions where Ican obtain parts  or how Ican control the oven temperature

[Keith LongParticipant @keithlong89920]

Hi

It might be worth doing a search for pottery or enameling kiln manufactures and suppliers

Keith

[Billy MillsParticipant @billymills]

Second Keith’s suggestion, for around £30 you can get a temp controller which will display and control the temp. Some models will also control the temp profile against time.

Regards, 

Alan.

[victor mcconvilleParticipant @victormcconville47638]

Hi David,

I have Gallenhamp oven for which I have obtained and fitted a Digital Temp Controller and thermo couple for around £40 ,the control is within 3-5 Degrees.

Do a search for Gallenhamp oven on this site and you will find my queries and the answers,as I am at work I cannot access the old receipt for thr controller.I will get back when I have more infi for you.

Vic

[victor mcconvilleParticipant @victormcconville47638]

Hi David,

I have Gallenhamp oven for which I have obtained and fitted a Digital Temp Controller and thermo couple for around £40 ,the control is within 3-5 Degrees.

Do a search for Gallenhamp oven on this site and you will find my queries and the answers,as I am at work I cannot access the old receipt for thr controller.I will get back when I have more infi for you.

Vic

[Sub MandrelParticipant @submandrel]

Farnell stock thermocouples, but process controller modules are £!!!!

 

So Victor’s suggestion seems better!

 

Neil

[Author]

Posts