Headstock Oil

Headstock Oil

This topic has 2 replies, 2 voices, and was last updated 29 April 2014 at 22:29 by Ian Welford.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
29 April 2014 at 21:03 #151058
Nick_G
Participant
@nick_g
I have tried searching the web for information upon the correct headstock oil for my Boxford STS 10-20 lathe. ………… Very confusing and contradictory.

It seems lots of people have many different ideas and reasons from a fairly light weight oil (e.g. auto transmission oil) to a much heavier grade.

They seem to differ as much as recipes for making curry.! With with everyone convinced their choice is the best.

This has left me 'confuddlized' What do you recommend.?

Regards, Nick
Advert

29 April 2014 at 21:03 #17382
Nick_G
Participant
@nick_g
Boxford STS 10-20
29 April 2014 at 22:29 #151062
Ian Welford
Participant
@ianwelford58739
Try Boxford direct and ask for their spec.

Smith and Allen at Darlington are really helpful if you can give them a spec ( no connection just satisified customer etc, etc).

I use a hydraulic oil with anti corrosion additives on mine.

Regards Ian
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 4
- 6
- 26 February 2025 at 15:58
  robin coleman
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 4
- 7
- 26 February 2025 at 15:58
  noel shelley
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 1
- 1
- 26 February 2025 at 15:57
  Michael Callaghan
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 63
- 26 February 2025 at 15:48
  JasonB
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 285
- 26 February 2025 at 15:31
  David Ambrose
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 7
- 8
- 26 February 2025 at 15:23
  SillyOldDuffer
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 1
- 1
- 26 February 2025 at 13:39
  Vic
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 11
- 12
- 26 February 2025 at 13:31
  Roderick Jenkins
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 2
- 26 February 2025 at 13:18
  Peter Cook 6
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 2
- 2
- 26 February 2025 at 12:32
  howardb
- New Member Paul
  Started by: paul richardson 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 26 February 2025 at 12:13
  JasonB
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 5
- 5
- 26 February 2025 at 11:13
  John Haine
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 7
- 26 February 2025 at 11:12
  Peter Cook 6
- THE MONTHLY TIPS COMPETITION – THE ENTRY THREAD!
  Started by: Neil Wyatt in: Hints And Tips for model engineers
- 9
- 24
- 26 February 2025 at 10:58
  Nicholas Farr
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 20
- 34
- 26 February 2025 at 10:37
  peterhod
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 10
- 23
- 26 February 2025 at 09:36
  rjenkinsgb
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 13
- 31
- 26 February 2025 at 09:12
  Michael Gilligan
- Metal spinning a deep cup
  Started by: Oily Rag in: Workshop Techniques
- 13
- 15
- 26 February 2025 at 08:58
  Trevor Drabble 1
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 3
- 3
- 25 February 2025 at 21:44
  Nigel Graham 2
- Harrison Milling Machines
  Started by: MARK RIGG in: Manual machine tools
- 3
- 5
- 25 February 2025 at 20:41
  Chris Crew
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 38
- 25 February 2025 at 20:03
  Fulmen
- Centec 2B fast traverse ideas
  Started by: Graham Horne 2 in: Manual machine tools
- 8
- 9
- 25 February 2025 at 19:41
  peak4
- Lathe help information 1 2
  Started by: maccecht in: Help and Assistance! (Offered or Wanted)
- 14
- 27
- 25 February 2025 at 18:46
  Pete Rimmer
- Centec 2b mill rebuild
  Started by: Graham Horne 2 in: Manual machine tools
- 4
- 11
- 25 February 2025 at 16:47
  Graham Horne 2

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies