Harrogate Exhibition

Advert

Harrogate Exhibition

Home Forums Exhibitions, Shows and Club Events Harrogate Exhibition

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #188932
    John Stevenson 1
    Participant
      @johnstevenson1

      Just a heads up that the Northern ME Exhibition is on this weekend, May 8th, 9th and 10th at the Harrogate show ground.

      I'll be there with ARC's new End Mill Grinder doing demo's and if anyone wants to bring a few [ not 10,000 ] I'll grind them during the day.

      Sizes from 3mm or 1/8" to 12mm or 1/2" in 2, 3 or 4 flute, HSS or Carbide.

      No charge but we will have a charity box on the stand for The Children's Heartbeat Trust. Donations are optional but if anyone doesn't give enough you will be drummed out and your name printed here after the show – be warned. wink

      Advert
      #4482
      John Stevenson 1
      Participant
        @johnstevenson1
        #188947
        magpie
        Participant
          @magpie

          Thanks for that John, but I think 'bogs' may be able to sort my end mills out for me. I will come and say hello on Saturday anyway as there are six of us from Crewe Men in Sheds going. Anyone else fancy a natter there are some of us 'mad modders' meeting by the big window (opposite the main entrance) at 12 noon so I hope to see a few of you there.

          Cheers Derek.

          #188959
          Involute Curve
          Participant
            @involutecurve

            Is it ok with Rippers John? and can it cope with plunging 4 flute cutters? the ones without a hole in the centre.

            Shaun

            #188964
            John Stevenson 1
            Participant
              @johnstevenson1

              Yes to both Shawn.

              On the 4 flutes if you have the hole it sharpens as normal but no hole makes it centre cutting.

              #188967
              Involute Curve
              Participant
                @involutecurve

                Ill bring a couple

                 

                 

                edited for spelking

                Edited By Involute Curve on 07/05/2015 11:02:26

                #188968
                Circlip
                Participant
                  @circlip

                  How many machines is K10 sticking in the boot??smiley

                  and No, pensions already k*******d.

                  Regards Ian.

                  #188984
                  Ketan Swali
                  Participant
                    @ketanswali79440
                    Posted by Circlip on 07/05/2015 11:05:19:

                    How many machines is K10 sticking in the boot??smiley

                    and No, pensions already k*******d.

                    Regards Ian.

                    Hi Ian, not selling at show.angel

                    #189021
                    Neil Wyatt
                    Moderator
                      @neilwyatt

                      I will be at Harrogate on Saturday, not Friday, now.

                      Neil

                      #189024
                      Alan Hopwood
                      Participant
                        @alanhopwood63369

                        A Mr B. Harrison has invited me to partake in strong drink at the bar on Saturday at 1pm. Now that should be a most unusual sight, an Englishman buying a Scot a drinkwink.

                        Regards,

                        Alan Hopwood.

                        #189034
                        Ian Welford
                        Participant
                          @ianwelford58739

                          And the Scotsman will no doubt reciprocate???surprise

                          See you Saturday.

                          John Stevensons machine looks every bit as capable in the metal as it were. It can even sharpen FC3 cutters.

                          John looks more statesman like in the flesh!

                          #189066
                          Circlip
                          Participant
                            @circlip

                            " John looks more statesman like in the flesh! "

                            Oh no he doesn't.

                            Regards Ian.

                            #189104
                            Oompa Lumpa
                            Participant
                              @oompalumpa34302

                              I will be bringing along one of my favourite carbide cutters and a couple of others. I have just knocked all the corners off it. It ticks me off when I am careless like that, but at least the charity will benefit so some good comes of it.

                              graham

                            Viewing 13 posts - 1 through 13 (of 13 total)
                            • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                            Advert

                            Latest Replies

                            Viewing 25 topics - 1 through 25 (of 25 total)
                            Viewing 25 topics - 1 through 25 (of 25 total)

                            View full reply list.

                            Advert

                            Newsletter Sign-up