Greetings from Derbyshire

Greetings from Derbyshire

This topic has 6 replies, 6 voices, and was last updated 10 December 2017 at 15:27 by peak4.

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
10 December 2017 at 08:59 #331354
Richard Millington
Participant
@richardmillington63972
Greetings from a snowy Derbyshire, Can't think of much more to say! Main interests are in motorbikes and making things.
Advert

10 December 2017 at 08:59 #40224
Richard Millington
Participant
@richardmillington63972
10 December 2017 at 13:27 #331409
V8Eng
Participant
@v8eng
Welcome to the forum Richard.

Your interests will fit in well.

V8.
10 December 2017 at 13:44 #331412
Chris Evans 6
Participant
@chrisevans6
Welcome along Richard from another with bikes as a main interest. Derbyshire is a big county, I am just over the border of South Derbyshire in Staffordshire.
10 December 2017 at 13:45 #331413
Brian H
Participant
@brianh50089
Welcome Richard from another Derbyshirer.

Brian
10 December 2017 at 15:06 #331431
Neil Wyatt
Moderator
@neilwyatt
Hello Richard,

Welcome to the forum!

Neil
10 December 2017 at 15:27 #331439
peak4
Participant
@peak4
And another welcome form a Derbyshire resident with an interest in bikes & kit cars; Snowy Buxton being the place of our new residence if you're in the area.

Regards

Bill
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 15
- 19
- 28 February 2025 at 00:11
  Emgee
- Centec 2B Mill Table—Surface Grind or Scrape?
  Started by: Graham Horne 2 in: Manual machine tools
- 4
- 4
- 27 February 2025 at 23:42
  peak4
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 288
- 27 February 2025 at 23:35
  duncan webster 1
- Vickers Inverted Engine 1 2
  Started by: JasonB in: Stationary engines
- 10
- 39
- 27 February 2025 at 22:27
  Nigel Graham 2
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 6
- 7
- 27 February 2025 at 22:10
  Tony Rowe 1
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 12
- 17
- 27 February 2025 at 21:44
  Nigel Graham 2
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 8
- 9
- 27 February 2025 at 21:38
  Nigel Graham 2
- Ford Transit
  Started by: Vic in: The Tea Room
- 2
- 2
- 27 February 2025 at 21:33
  Nigel Graham 2
- Scam – Close but no Cigar!
  Started by: Chris Crew in: The Tea Room
- 8
- 9
- 27 February 2025 at 21:29
  Nigel Graham 2
- What steel
  Started by: Peter Simpson 3 in: Beginners questions
- 6
- 9
- 27 February 2025 at 20:58
  JasonB
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 14
- 19
- 27 February 2025 at 20:41
  Grindstone Cowboy
- Source for trangular carbide inserts.
  Started by: Andrew Tinsley in: General Questions
- 9
- 15
- 27 February 2025 at 20:40
  JasonB
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 6
- 7
- 27 February 2025 at 18:23
  Robert Atkinson 2
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 14
- 20
- 27 February 2025 at 16:34
  Oldiron
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 5
- 27 February 2025 at 09:06
  michael howarth 1
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 8
- 27 February 2025 at 06:56
  Plasma
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 39
- 26 February 2025 at 20:33
  Fulmen
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 7
- 26 February 2025 at 20:32
  celso ari schlichting
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 67
- 26 February 2025 at 18:41
  JasonB
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 4
- 4
- 26 February 2025 at 18:21
  Dave S
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 35
- 26 February 2025 at 18:14
  bernard towers
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 5
- 9
- 26 February 2025 at 17:30
  robin coleman
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 2
- 26 February 2025 at 13:18
  Peter Cook 6
- New Member Paul
  Started by: paul richardson 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 26 February 2025 at 12:13
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies