Greetings all!

[James Wilkinson 3Participant @jameswilkinson3]

Introduction

[James Wilkinson 3Participant @jameswilkinson3]

Hey all, looking forward to seeing peoples projects and discovering new machining techniques. Currently I have a few old tools and machines but my real work hoarse is my Boxford AUD series 1 Lathe.

[David George 1Participant @davidgeorge1]

Hi welcome to the group. lots of information and help where are you based?

David

[Chris Evans 6Participant @chrisevans6]

Welcome along James, what are your interests ? Motorcycles are my thing but all machining interests me.

[James Wilkinson 3Participant @jameswilkinson3]

Thanks guys. I am 36 years old, toolmaker by first trade and Goldsmith by second. I am currently self employed manufacturing windblown musical instruments or more precise fipple based flutes. I have always been interested in model engineering and my father has just started to learn it at his local model club so I am passing on a lot of my machining knowledge to him and letting him use my machines and tools.

At some point I will begin making models but feel I am not quite ready due to lack of some key machineary. I am very interested in machines and look forward to discovering new machine tools and the vast array of machining processes, especially milling work set ups on lathes. I am based in Plymouth UK.

[Neil WyattModerator @neilwyatt]

Welcome to the forum James

I've always wanted to make myself a big, low penny whistle. (Even better if I could play it half decently…)

Neil

[James Wilkinson 3Participant @jameswilkinson3]

Thanks Neil, well that would be a Low Whistle then. I make Low Whistles and Penny whistles one of the thing's I am looking to do here is to explore ways to cut the windways (slightly tapered). The pipe being Brass and 1.6mm thick. So really I am just cutting out a slot from the end of the tube, but the walls having a slight taper toward the end of the bore. There are many ideas on how to do this.

Check this resource out Neil to get you started http://www.ggwhistles.com/howto/

[BazyleParticipant @bazyle]

Interesting whistle site there – I must put a link on our club site. At school I made whistles from elder stems as the pith could be removed, and not far from you at Tavy as it happens. Have you joined the Plymouth club?

[James Wilkinson 3Participant @jameswilkinson3]

Hey Bazyle, it's a great site indeed which gets you up and running in no time. Yeah Tavy is very close, I am not a member of any clubs, not yet anyway!

[mark smith 20Participant @marksmith20]

Hi James, interesting occupation, i make string instruments and bows for a living. Ive done a few with gold mounts but the cost is bloody high for gold so i mainly stick to silver most of the time.

[Neil WyattModerator @neilwyatt]

Posted by James Wilkinson 3 on 05/02/2017 18:35:21:

Check this resource out Neil to get you started http://www.ggwhistles.com/howto/

Wow, that's a great resource.

Question: From that I assume you start at the bottom and increase the hole size until you hit 'in tune', then move up to the next one is that right?

Neil

[James Wilkinson 3Participant @jameswilkinson3]

Ah! we have a luthier here as well! great to hear from you Mark. Neil, yes thats basically it, you get the fundamental correct first (the overall length of the tube) and then drill your holes, then tune each one in. Make sure you check the previous hole tunings as you adjust the holes above!

[Author]

Posts