Free Plans to be available on this website

[Neil WyattModerator @neilwyatt]

I'm delighted to announce that, thanks to the sterling efforts of forum member Nick Farr, I will be able to put each of the free plans published with MEW between 1990 and 1994 on this website.

The article HERE will also act as an index page.

Limitations on how we can handle big images means that each plan is presented as a pair of jpegs of the whole thing, but at fairly low resolution. These act as a guide for assembling the plan from overlapping scans in a series of printable pdfs.

The first plan is for a Rotary Table.

Neil

[Neil WyattModerator @neilwyatt]

MEW free plans to be reissued online

[Harry WilkesParticipant @harrywilkes58467]

Thanks to all concerned.

H

[Michael GilliganParticipant @michaelgilligan61133]

+1

Well done, folks!

MichaelG.

[modeng2000Participant @modeng2000]

Excellent Neil, many thanks.

John

[Thor 🇳🇴Participant @thor]

Good work Neil and Nick, much appreciated.

Thor

Edited By Thor on 16/05/2014 17:11:41

[Rik ShawParticipant @rikshaw]

Everyone loves a freebie – thanks chaps.

Rik

[Neil WyattModerator @neilwyatt]

The real thanks must go to Nick, he's done a mammoth job.

Looking at a couple of back issues, I don't know if all of the plans had accompanying articles, but some certainly do. If anyone comes across any errors or errata printed in later issues, please post them here.

Neil

[Ady1Participant @ady1]

Free is always popular.

If you put the pdfs into a single file and view them "view / page layout / facing" you get a better perspective

Edited By Ady1 on 16/05/2014 18:14:20

[Michael GilliganParticipant @michaelgilligan61133]

I've just loaded the two big PDFs into GoodReader on the iPad.

They are legible at "fit screen" and I can "pinch-zoom" to see detail at pixel level.

Absolutely superb work, Nick … Couldn't ask for better

Thanks

MichaelG.

[mark mcParticipant @markmc72333]

Sweet, free plans are always nice. Thanks.

[Boiler BriParticipant @boilerbri]

Nice, as a Yorkshire man FREEEEE sound cheap and inviting.

Well done Neil

Bri

[Derek DroverParticipant @derekdrover32802]

I gather there was once a design published in MEW for a weir pump suitable for the runningboard of 5" loco's… any chance of this appearing??

Ta

del

[Neil WyattModerator @neilwyatt]

Sorry Derek, that was ME, indeed I think several such 'running board' pumps have appeared in ME over the years in varying levels of detail. You can, of course, lobby Diane to see if she can republish one!

Neil

[RobboParticipant @robbo]

Splendid work chaps!

Re the rotary table, this was in the very first issue of MEW, and although titled "Rotary Table" on the drawings was described by the author as "A Rotary Milling Device", and was a simple substitute for the conventional rotary table, not having the worm drive etc. The usual job of rounding off coupling rods is mentioned as a reason for it. It was intended to be mounted on a vertical slide on a Myford lathe.

The accompanying article covered 4 pages, but only about 2 pages worth were about building the table. The rest was taken up with pictures of locos and a traction engine. These days it would attract comment about unnecessary padding because of the pictures!

Phil

[Neil WyattModerator @neilwyatt]

The only unnecessary padding around MEW these days is just north of my waistband

Neil

[Neil WyattModerator @neilwyatt]

A new free plan has been uploaded today – Stan Bray's swing clear rear toolpost.

Neil

[Mark P.Participant @markp]

Splendid Neil,have been thinking of a rear tool post over the last week or so.

Regards Mark P.

[Gone AwayParticipant @goneaway]

The link for the Swing Clear Rear Toolpost on the Free Plan Collection Page seems to be screwed up.

Unlike the link for the Rotary Table – which leads to another page listing the pdf's for the various pages – this one leads directly to the pdf for page-8 (only) of the plan.

[JasonBModerator @jasonb]

Thanks OMG, I think I have fixed that now. Also added some thumbnails to replace the red X

J

Edited By JasonB on 27/05/2014 19:24:05

[Neil WyattModerator @neilwyatt]

Thanks for straightening those out Jason.

I like the thumbnail.

Neil

[RobboParticipant @robbo]

In MEW No 216, Derek Spedding made a Toolmakers Hammer from the plan included in MEW No 8.

He ended his article " Maybe it is time to re-issue the drawings for this ………tool….."

As it should be coming up on this thread, has Derek got a crystal ball?

Can I borrow it?

Phil

[JasonBModerator @jasonb]

Or is that where Neil got the idea from

J

[Neil WyattModerator @neilwyatt]

'Correlation does not imply causality'… or does it?

Neil

[Michael GilliganParticipant @michaelgilligan61133]

Posted by Neil Wyatt on 28/05/2014 13:11:33:

'Correlation does not imply causality'… or does it?

Neil

.

Neil,

I think you might enjoy this

MichaelG.

[Author]

Posts