Firefly part 3

Firefly part 3

This topic has 1 reply, 1 voice, and was last updated 25 June 2012 at 18:29 by JasonB.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
25 June 2012 at 18:29 #93088
JasonB
Moderator
@jasonb
I know that photos are thin on the ground but if they are to be included can they at least be of the actual items being machined!!

Fig 10 "turning the main bearing" Shows a roughed out bit of bronze being parted off. It does not show the completly turned and bored bearing being sawn off as per the text.

Would also have been nice for the beginner to know how the hemi head was formed.

Jason
Advert

25 June 2012 at 18:29 #37541
JasonB
Moderator
@jasonb
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Tapping in a vice
  Started by: John Gray 7 in: Beginners questions
- 3
- 3
- 4 December 2024 at 23:44
  Huub
- Taylor Hobson cutter grinder modificaton
  Started by: David George 1 in: Workshop Tools and Tooling
- 3
- 6
- 4 December 2024 at 22:30
  noel shelley
- A bit of a puzzle.
  Started by: Michael Callaghan in: Help and Assistance! (Offered or Wanted)
- 1
- 1
- 4 December 2024 at 21:15
  Michael Callaghan
- Cutting a worm wheel
  Started by: Ramon Wilson in: Workshop Techniques
- 6
- 6
- 4 December 2024 at 21:09
  Pete Rimmer
- Slideway oiler thingies
  Started by: ANDY CAWLEY in: General Questions
- 10
- 15
- 4 December 2024 at 20:10
  ANDY CAWLEY
- Model Subjects that Inspire, and to Aspire to..
  Started by: Diogenes in: Miscellaneous models
- 5
- 14
- 4 December 2024 at 20:07
  JasonB
- Armortek series 1 landrover kit
  Started by: Plasma in: Miscellaneous models
- 6
- 19
- 4 December 2024 at 20:01
  Plasma
- Jaguar [oh dear] 1 2
  Started by: Michael Gilligan in: The Tea Room
- 26
- 48
- 4 December 2024 at 19:31
  Michael Gilligan
- Pittler spiral cutting test
  Started by: vic newey in: Workshop Techniques
- 5
- 7
- 4 December 2024 at 18:48
  vic newey
- Dismantling the Pratt Burnerd Myford 3 jaw chuck 1 2
  Started by: icon in: Workshop Tools and Tooling
- 16
- 34
- 4 December 2024 at 18:48
  icon
- Coke Fired :)
  Started by: Michael Gilligan in: The Tea Room
- 5
- 5
- 4 December 2024 at 17:45
  duncan webster 1
- Radial engines
  Started by: Cedric in: Help and Assistance! (Offered or Wanted)
- 2
- 2
- 4 December 2024 at 17:03
  JasonB
- CL500m (it was free!)
  Started by: Gary Lynch in: Manual machine tools
- 6
- 10
- 4 December 2024 at 13:49
  SillyOldDuffer
- What is (Traditional) Model Engineering? 1 2 … 4 5
  Started by: Martin Kyte in: General Questions
- 35
- 106
- 4 December 2024 at 13:36
  Bazyle
- Lathe vibration in workshop 1 2
  Started by: Mark Salzedo 1 in: General Questions
- 21
- 46
- 4 December 2024 at 12:03
  Howard Lewis
- Chester Super Lux advice 1 2 … 6 7
  Started by: Taf_Pembs in: Manual machine tools
- 21
- 165
- 4 December 2024 at 10:16
  Nigel Bennett
- Beaverpal Mill strip for moving/disposal? Advice please
  Started by: pete hammond in: Manual machine tools
- 5
- 8
- 3 December 2024 at 22:29
  Pete
- Wiring a contactor
  Started by: Charles Lamont in: Workshop Tools and Tooling
- 9
- 14
- 3 December 2024 at 20:29
  SillyOldDuffer
- Building Wilding’s Tower Clock
  Started by: Chris Raynerd 2 in: Clocks and Scientific Instruments
- 5
- 13
- 3 December 2024 at 20:28
  bernard towers
- Strange drilling situation
  Started by: gerry madden in: Workshop Techniques
- 19
- 23
- 3 December 2024 at 12:45
  gerry madden
- A small 4-jaw chuck
  Started by: Michael Gilligan in: Suggested Online Resources
- 8
- 8
- 3 December 2024 at 12:11
  bernard towers
- Did the British Invent EVERYTHING! 1 2
  Started by: SillyOldDuffer in: The Tea Room
- 22
- 36
- 3 December 2024 at 11:59
  Derek Drover
- Muffle furnace 1 2
  Started by: Sonic Escape in: Work In Progress and completed items
- 15
- 38
- 3 December 2024 at 09:49
  noel shelley
- Eclipse No 39 Drill sharpener Instructions.
  Started by: Andrew Tinsley in: General Questions
- 2
- 4
- 3 December 2024 at 08:40
  MichaelR
- Loctite advice Stuart Triple
  Started by: DEREK SPEDDING 1 in: Stationary engines
- 12
- 17
- 3 December 2024 at 02:29
  Michael Gilligan

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4757

December 2024

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies