Finishing artwork and design

[andrew winksParticipant @andrewwinks64215]

Just saw a new device on the market made by Janome, called the Edge. I'm thinking it may be adapted to cut brass shim, thin vinyl, etc for engine trimming, lettering, numbering, etc

looks like a home version of the CNC pantographs out there and probably a lot cheaper

Andrew

[andrew winksParticipant @andrewwinks64215]

[JasonBModerator @jasonb]

I've seen people use these home vinyl cutters for cutting masks for lining and general decoration over teh last couple of years so not new but it will do vinyl and masking film, not sure about brass shim. Ramon who writes for the mag uses one and Julia Olds uses a Craftrobo that will take a DXF file from your cad package

Edited By JasonB on 02/05/2015 08:17:17

[Michael GilliganParticipant @michaelgilligan61133]

Andrew,

There's quite a detailed review by a lady called Samantha Walker

**LINK**

Which includes a link to the user manual.

Looks an ideal gift for 'the other half' … with occasional usage rights

MichaelG.

.

P.S. in my limited experience, Janome machines are excellent albeit not exactly cheap.

Edited By Michael Gilligan on 02/05/2015 10:12:45

[andrew winksParticipant @andrewwinks64215]

Sounds like a good plan.Michael!

[Author]

Posts