Faircut Lathe Owner

Faircut Lathe Owner

This topic has 3 replies, 2 voices, and was last updated 3 November 2019 at 10:14 by Andy Carlson.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
2 November 2019 at 14:15 #435675
Brian Morehen
Participant
@brianmorehen85290
No 2 Photo Brass nut fitted to cross slide bottom drilled and tapped 4BA and fixed with allen screws . Cross slide thread of 3/8 whitworth feels nice and tight now to make a replacement top cross slde end

No 3 photo to folllow.

Brian Morehen
Advert

2 November 2019 at 14:15 #40648
Brian Morehen
Participant
@brianmorehen85290
Repaired Cross Slide
2 November 2019 at 18:25 #435707
Brian Morehen
Participant
@brianmorehen85290
No 3 Photo
3 November 2019 at 10:14 #435756
Andy Carlson
Participant
@andycarlson18141
Thanks for the pics Brian. Interesting that your cross slide screw is Whitworth. My pre-war Faircut has a square thread here. The saddle has a brass/bronze/gunmetal (not sure which) insert carrying the female thread. If ever I can figure out how it's held in then I might have a go at making a new insert for mine.

Regards, Andy
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Metal strands in graphite packing
  Started by: Tony Rowe 1 in: Beginners questions
- 6
- 7
- 27 February 2025 at 22:10
  Tony Rowe 1
- Gear Cutting Problem
  Started by: Alan Charleston in: General Questions
- 12
- 17
- 27 February 2025 at 21:44
  Nigel Graham 2
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 8
- 9
- 27 February 2025 at 21:38
  Nigel Graham 2
- Ford Transit
  Started by: Vic in: The Tea Room
- 2
- 2
- 27 February 2025 at 21:33
  Nigel Graham 2
- Scam – Close but no Cigar!
  Started by: Chris Crew in: The Tea Room
- 8
- 9
- 27 February 2025 at 21:29
  Nigel Graham 2
- Workshop wiring
  Started by: robin coleman in: Beginners questions
- 13
- 17
- 27 February 2025 at 21:12
  Nigel Graham 2
- What steel
  Started by: Peter Simpson 3 in: Beginners questions
- 6
- 9
- 27 February 2025 at 20:58
  JasonB
- Centec 2B Mill Table—Surface Grind or Scrape?
  Started by: Graham Horne 2 in: Manual machine tools
- 1
- 1
- 27 February 2025 at 20:49
  Graham Horne 2
- Slow Again?
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 14
- 19
- 27 February 2025 at 20:41
  Grindstone Cowboy
- Source for trangular carbide inserts.
  Started by: Andrew Tinsley in: General Questions
- 9
- 15
- 27 February 2025 at 20:40
  JasonB
- Vickers Inverted Engine 1 2
  Started by: JasonB in: Stationary engines
- 10
- 38
- 27 February 2025 at 19:17
  JasonB
- Best way to wire up 4 motors to a 4QD controller
  Started by: Michael Callaghan in: Locomotives
- 6
- 7
- 27 February 2025 at 18:23
  Robert Atkinson 2
- Vehicle Tax
  Started by: Michael Gilligan in: The Tea Room
- 14
- 20
- 27 February 2025 at 16:34
  Oldiron
- WM14 mill/drill gears
  Started by: michael howarth 1 in: General Questions
- 2
- 5
- 27 February 2025 at 09:06
  michael howarth 1
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 6
- 8
- 27 February 2025 at 06:56
  Plasma
- Magnetic optical punch 1 2
  Started by: Fulmen in: Workshop Tools and Tooling
- 10
- 39
- 26 February 2025 at 20:33
  Fulmen
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 7
- 26 February 2025 at 20:32
  celso ari schlichting
- How Would I Machine this CAD designed Ratchet 1 2 3
  Started by: SillyOldDuffer in: CAD – Technical drawing & design
- 16
- 67
- 26 February 2025 at 18:41
  JasonB
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 4
- 4
- 26 February 2025 at 18:21
  Dave S
- DRO Origin Setting 1 2
  Started by: Peter Cook 6 in: Beginners questions
- 21
- 35
- 26 February 2025 at 18:14
  bernard towers
- Electric magnet
  Started by: robin coleman in: Electronics in the Workshop
- 5
- 9
- 26 February 2025 at 17:30
  robin coleman
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 11 12
  Started by: Neil Wyatt in: Model Engineer.
- 70
- 286
- 26 February 2025 at 16:14
  Michael Gilligan
- Tooth Angle for the Myford Bull Wheel Indexer device
  Started by: Greensands in: Workshop Tools and Tooling
- 9
- 16
- 26 February 2025 at 13:56
  Michael Gilligan
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 2
- 26 February 2025 at 13:18
  Peter Cook 6
- New Member Paul
  Started by: paul richardson 1 in: Introduce Yourself – New members start here!
- 2
- 2
- 26 February 2025 at 12:13
  JasonB

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies