Emco FB-2 Manual

[andrew winksParticipant @andrewwinks64215]

[andrew winksParticipant @andrewwinks64215]

Hi

wondering if anyone can assist with supply of the manual as supplied with the Austrian Emco FB-2, either an original ebook…if such an item exists.

Cheers, Andrew

[JohnFParticipant @johnf59703]

Andrew, I don't have an e copy but have the original that came with my machine, happy to copy it for you if you want.

Where are you situated ? John

[Johan van ZantenParticipant @johanvanzanten]

Hi Andrew, Go to http://www.emco.or.at Click machinen, Emco, service anleitung, Fraisemachinen, Emco fb2 and you find a free download of the user maual and the service manual in the German language.

Regards, Johan.

[Colin HarwoodParticipant @balljoint]

Hi Andrew

I have a pdf file of the FB2 manual in english, which you are welome to a copy of.

PM me if you are interested

Regards

Colin

[andrew winksParticipant @andrewwinks64215]

Many thanks all!

[petro1headParticipant @petro1head]

Old thread I know byt same question. Does anyone have a PDF manual?

[petro1headParticipant @petro1head]

check

[RobboParticipant @robbo]

See your messages.

[Joseph Noci 1Participant @josephnoci1]

Check here:

**LINK**]

Joe

[Greg JarosinskiParticipant @gregjarosinski44045]

Hi ALL.

Have anyone got English version of this manual. I'd be very appreciated.

Many Thanks

Greg

[RobboParticipant @robbo]

Greg

Have sent you a Personal Message.

Check your Inbox, second icon on green menu bar at top of page if you are new to this system.

[Jim CParticipant @jimc]

Hi There,

I have a Rishton mill which I think was based on the FB2 ?? It would be good to see the manual for the FB2 to see the similarities but a night class in German is not going to happen !!!! Jim.

[Ian PParticipant @ianp]

Robbo

Whilst I do have a scanned/downloaded copy of an FB2 manual it is very poor quality and some pages are nearly unreadable, please could I put my name down for a PDF of the English version?

Regards

IanP

[Mark Gould 1Participant @markgould1]

I have this manual as a pdf file. Let me know if I can help.

[RobboParticipant @robbo]

Mark,

Will you get IanP's email address via a PM and send him a copy or shall I?

[Ian PParticipant @ianp]

Now I'm in a quandary with two possibilities of FB2 manuals!

I could put Mark and Robbo's names in a hat and PM whoever comes out first, or, I could PM to both and get two versions. On reflection, because all the manuals I have seen are poor quality scans maybe I should get both copies and use PDF-Exchange to mix and match the best pages to create a new version.

Thanks anyway…

IanP

[Colin HarwoodParticipant @balljoint]

Or to increase the quandry I could also provide you with a well scanned PDF

Colin

[Mark Gould 1Participant @markgould1]

I have just emailed the manual to Greg and to Jim. Please PM me your email address if you need one.

[RobboParticipant @robbo]

So what about IanP?

Here's a sample page from mine.

[Emil KarlssonParticipant @emilkarlsson97200]

Hi guys,

Does anyone have the english version of the manual in pdf-format? I would be very thankful for it!

/Cheers from Sweden

[Mark Gould 1Participant @markgould1]

Emil,

Let me know your email address, I have the pdf for you.

Regards,

Mark

[Emil KarlssonParticipant @emilkarlsson97200]

Hi!

Would any of you FB 2-owners out there be super kind and make a very simple sketch drawing of the plastic draw bar cap on top of the spindle? The one on my machine is missing so I`m turning one in the lathe, just need a few dimensions . It would be ver much appreciated!

Best regards

Emil

[Vicente LanzParticipant @vicentelanz18733]

Hi,

I'm looking for the PDF file of the EMCO FB-2 manual. I just bought a used one, having the manual will be very useful.

I'll appreciate if anyone can help me.

Best regards,

Vicente

[Thor 🇳🇴Participant @thor]

Hi Vicente,

Congratulations with your FB-2 and welcome to the forum. I have a PDF of the FB-2 manual, send me a PM with your e-mail if you are interested.

Thor

[Author]

Posts