Drawing needed for 5 inch gauge three cylinder royal scot

Drawing needed for 5 inch gauge three cylinder royal scot

This topic has 1 reply, 1 voice, and was last updated 14 June 2022 at 14:27 by Michael Callaghan.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
14 June 2022 at 14:27 #601704
Michael Callaghan
Participant
@michaelcallaghan68621
Hi chaps, I need a drawing of the front Centre panel that goes just in front of the smoke book door to the top of the front buffer. This is for a three cylinder royal Scot so needs the housing for the piston rod. If you have details of this part can you please let me know. Thanks.
Advert

14 June 2022 at 14:27 #2136
Michael Callaghan
Participant
@michaelcallaghan68621
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Dr Schlesinger
  Started by: ryan.carter848 in: Books
- 4
- 5
- 3 March 2025 at 11:58
  Phil P
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 6
- 9
- 3 March 2025 at 10:46
  Tomek
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 14
- 19
- 3 March 2025 at 10:33
  Graham Meek
- What’s this for…no.8?
  Started by: beeza650 in: Beginners questions
- 8
- 11
- 3 March 2025 at 10:31
  SillyOldDuffer
- Continuing the Television theme …
  Started by: Michael Gilligan in: Electronics in the Workshop
- 6
- 10
- 3 March 2025 at 10:14
  Michael Gilligan
- Windows 11 Upgrade – non compliant machines.
  Started by: Peter Cook 6 in: The Tea Room
- 6
- 7
- 3 March 2025 at 10:01
  Howi
- Another lidl picture fail
  Started by: Ian Parkin in: The Tea Room
- 3
- 4
- 3 March 2025 at 09:43
  Nick Wheeler
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 7
- 12
- 3 March 2025 at 09:13
  Circlip
- Slow Again? 1 2
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 50
- 3 March 2025 at 08:17
  SillyOldDuffer
- Always be careful
  Started by: Blue Heeler in: The Tea Room
- 2
- 2
- 3 March 2025 at 08:06
  Nealeb
- Taig lathe DC motor
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 9
- 23
- 2 March 2025 at 23:17
  bernard towers
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 12
- 20
- 2 March 2025 at 21:21
  Fulmen
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 14
- 16
- 2 March 2025 at 19:24
  flatline
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 9
- 20
- 2 March 2025 at 19:19
  Colin Bishop
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 5
- 7
- 2 March 2025 at 16:54
  Speedy Builder5
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 54
- 172
- 2 March 2025 at 15:18
  JasonB
- What’s this for…no.7?
  Started by: beeza650 in: Beginners questions
- 5
- 8
- 2 March 2025 at 15:17
  beeza650
- Ford Transit
  Started by: Vic in: The Tea Room
- 8
- 14
- 2 March 2025 at 15:03
  Trevor Drabble 1
- What’s this for…no.6?
  Started by: beeza650 in: Beginners questions
- 3
- 4
- 2 March 2025 at 13:41
  Bazyle
- What’s this for…no.5?
  Started by: beeza650 in: Beginners questions
- 11
- 20
- 2 March 2025 at 12:12
  Phil P
- Looking for an OCR package with ‘snap’ facilities
  Started by: Greensands in: The Tea Room
- 8
- 14
- 2 March 2025 at 11:31
  Michael Gilligan
- For BTInternet Users: Safe Domain / Sender Lists?
  Started by: Nigel Graham 2 in: The Tea Room
- 2
- 4
- 1 March 2025 at 22:01
  Nigel Graham 2
- Homemade Headstock Lathe 1 fondry work
  Started by: celso ari schlichting in: General Questions
- 4
- 8
- 1 March 2025 at 20:09
  celso ari schlichting
- Centec 2B Mill Table—Surface Grind or Scrape?
  Started by: Graham Horne 2 in: Manual machine tools
- 8
- 16
- 1 March 2025 at 20:00
  ryan.carter848
- What’s this for…no.2?
  Started by: beeza650 in: Beginners questions
- 8
- 15
- 1 March 2025 at 17:59
  Tony Pratt 1

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies