Digital Log In

Digital Log In

This topic has 2 replies, 2 voices, and was last updated 21 February 2025 at 09:46 by John Ross 4.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
20 February 2025 at 21:10 #784563
John Ross 4
Participant
@johnross4
Evening

Can anybody help seem to be unable to log into archives at pagesuite due to “The credentials are valid, but no active subscription was found!” has been working for years suddenly just stoped is this due to new “Model Engineer & Workshop” magazine launch.

Any help greatly appreciated.

John
Advert

21 February 2025 at 06:46 #784606
JasonB
Moderator
@jasonb
You need to contact Classicmags.

If you go to the red button for Help/FAQs. Then right down the bottom is a contact form, fill that in or you can email or phone them.
21 February 2025 at 09:46 #784678
John Ross 4
Participant
@johnross4
Thank you very much
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Just purchased a lot of stuff
  Started by: beeza650 in: Beginners questions
- 3
- 6
- 21 February 2025 at 19:17
  beeza650
- VERY delicate rust removal
  Started by: beeza650 in: Beginners questions
- 11
- 17
- 21 February 2025 at 19:08
  jimmy b
- indexing head lathe 1 2
  Started by: Danni Burns in: Manual machine tools
- 15
- 34
- 21 February 2025 at 19:04
  Bazyle
- E Bay shot in foot
  Started by: duncan webster 1 in: The Tea Room
- 1
- 1
- 21 February 2025 at 18:36
  duncan webster 1
- Lathe Chuck thread size
  Started by: Bootlegger Blacky in: Workshop Tools and Tooling
- 3
- 3
- 21 February 2025 at 18:25
  DC31k
- Cannot access homeworkshop.
  Started by: Graham Titman in: The Tea Room
- 4
- 5
- 21 February 2025 at 17:57
  Graham Titman
- Apple’s reaction to U.K. Gov
  Started by: Michael Gilligan in: The Tea Room
- 1
- 1
- 21 February 2025 at 17:56
  Michael Gilligan
- Lathe help information
  Started by: maccecht in: Help and Assistance! (Offered or Wanted)
- 11
- 22
- 21 February 2025 at 16:59
  Bootlegger Blacky
- Electric Mobility
  Started by: Vic in: The Tea Room
- 3
- 5
- 21 February 2025 at 16:00
  Michael Gilligan
- Discussion on the Future Direction of Model Engineer and Workshop 1 2 … 10 11
  Started by: Neil Wyatt in: Model Engineer.
- 68
- 268
- 21 February 2025 at 14:30
  duncan webster 1
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 8
- 18
- 21 February 2025 at 13:22
  Colin Bishop
- NEW LOOK – Model Engineer & Workshop 1 2 … 6 7
  Started by: sohara in: Model Engineer & Workshop
- 51
- 156
- 21 February 2025 at 13:03
  JasonB
- Interesting USB C Cable
  Started by: Vic in: The Tea Room
- 2
- 3
- 21 February 2025 at 12:54
  Vic
- End mill sharpening fixture
  Started by: celso ari schlichting in: General Questions
- 2
- 2
- 21 February 2025 at 10:18
  JohnF
- New Member – Unimat 3 Owner
  Started by: pennyblack in: Introduce Yourself – New members start here!
- 2
- 2
- 21 February 2025 at 09:57
  Graham Meek
- Digital Log In
  Started by: John Ross 4 in: General Questions
- 2
- 3
- 21 February 2025 at 09:46
  John Ross 4
- New member – hobby engineer
  Started by: zymurgy2289 in: Introduce Yourself – New members start here!
- 4
- 6
- 21 February 2025 at 09:36
  noel shelley
- New Myford Owner with Problems!!!
  Started by: Richard Bartholomew 3 in: Introduce Yourself – New members start here!
- 11
- 14
- 21 February 2025 at 09:12
  Charles Lamont
- SHARP PRACTICE ?
  Started by: Speedy Builder5 in: The Tea Room
- 10
- 19
- 20 February 2025 at 23:41
  Vic
- Cranko No2 Oscillating Horizontal Steam Engine from New Zealand circ 1940 – 1950
  Started by: Blue Heeler in: Stationary engines
- 1
- 1
- 20 February 2025 at 23:23
  Blue Heeler
- Cut & Paste Oddity (Textual)?
  Started by: Nigel Graham 2 in: The Tea Room
- 1
- 1
- 20 February 2025 at 22:53
  Nigel Graham 2
- Telephone call-blocking
  Started by: Michael Gilligan in: The Tea Room
- 7
- 16
- 20 February 2025 at 21:07
  Paul Lousick
- A Marine Condensing Engine 1 2 … 5 6
  Started by: Ramon Wilson in: Work In Progress and completed items
- 26
- 129
- 20 February 2025 at 18:12
  Ramon Wilson
- Unimat SL renovation – any tips?
  Started by: rjenkinsgb in: Manual machine tools
- 9
- 16
- 20 February 2025 at 17:48
  Michael Gilligan
- Emco Compact 5 Modifications 1 2 … 4 5
  Started by: Graham Meek in: Manual machine tools
- 12
- 109
- 20 February 2025 at 17:08
  Graham Meek

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issues

Issue 4761

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies