Dholpur springing and derailing problems.

Dholpur springing and derailing problems.

This topic has 1 reply, 1 voice, and was last updated 17 December 2020 at 19:12 by Andrew Binning.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
17 December 2020 at 19:12 #514056
Andrew Binning
Participant
@andrewbinning37010
I am building a Dholpur and would appreciate advice from any Dholpur builders who have encountered derailing problems with the bogie/pony truck. What did they do to cure the problem and how did they set up the springing on drivers and non driving axles.
Advert

17 December 2020 at 19:12 #1988
Andrew Binning
Participant
@andrewbinning37010
Looking for advice from Dholpur builder
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

Code of Conduct

Latest Replies

Viewing 25 topics - 1 through 25 (of 25 total)

- Topic
- Voices
- Posts
- Last Post
- Taig lathe DC motor 1 2
  Started by: Peter Cook 6 in: Work In Progress and completed items
- 12
- 31
- 4 March 2025 at 12:49
  Robert Atkinson 2
- A” WEAVER “1CC DIESEL ENGINE 1 2
  Started by: KEITH BEAUMONT in: I/C Engines
- 8
- 31
- 4 March 2025 at 12:38
  jimbo7636
- Turning Question: Fine Chatter / Wave Pattern 1 2
  Started by: Nigel Graham 2 in: General Questions
- 14
- 31
- 4 March 2025 at 12:23
  Fowlers Fury
- Midlands Model Engineering Exhibition
  Started by: alan ord 2 in: General Questions
- 2
- 2
- 4 March 2025 at 12:00
  John Hinkley
- Kelsey Media buys Mortons titles
  Started by: Colin Bishop in: Website Questions, Comments, and Suggestions
- 9
- 21
- 4 March 2025 at 11:38
  SillyOldDuffer
- What’s this for…no.8?
  Started by: beeza650 in: Beginners questions
- 10
- 17
- 4 March 2025 at 11:11
  Howard Lewis
- boring for crankshaft
  Started by: bricky in: Help and Assistance! (Offered or Wanted)
- 4
- 5
- 4 March 2025 at 10:45
  ChrisLH
- Clocktime
  Started by: Michael Gilligan in: Clocks and Scientific Instruments
- 3
- 3
- 4 March 2025 at 10:04
  Bazyle
- Continuing the Television theme …
  Started by: Michael Gilligan in: Electronics in the Workshop
- 9
- 16
- 4 March 2025 at 09:09
  Russell Eberhardt
- Dr Schlesinger
  Started by: ryan.carter848 in: Books
- 4
- 6
- 4 March 2025 at 08:29
  ryan.carter848
- Case hardening
  Started by: Garry Coles in: General Questions
- 7
- 10
- 3 March 2025 at 21:41
  Fulmen
- Warco WM18B CNC conversion
  Started by: Tomek in: CNC machines, Home builds, Conversions, ELS, automation, software, etc tools
- 10
- 18
- 3 March 2025 at 20:56
  Tomek
- Use of a weighted cord for bullwheel indexing.
  Started by: Greensands in: Workshop Techniques
- 8
- 10
- 3 March 2025 at 20:51
  John Purdy
- Drilling on VMC Mill
  Started by: Vic in: Manual machine tools
- 5
- 5
- 3 March 2025 at 20:41
  old mart
- Lead-sheathed wiring – why? 1 2
  Started by: gerry madden in: Materials
- 24
- 28
- 3 March 2025 at 20:36
  old mart
- Bending Rolls
  Started by: Baldric in: Workshop Tools and Tooling
- 14
- 23
- 3 March 2025 at 20:23
  Julie Ann
- 3/16” BSF mill gib screws 1 2
  Started by: Graham Horne 2 in: General Questions
- 14
- 32
- 3 March 2025 at 20:13
  old mart
- Another lidl picture fail
  Started by: Ian Parkin in: The Tea Room
- 4
- 5
- 3 March 2025 at 19:25
  V8Eng
- Windows 11 Upgrade – non compliant machines.
  Started by: Peter Cook 6 in: The Tea Room
- 6
- 7
- 3 March 2025 at 10:01
  Howi
- Pivot hole bushing
  Started by: Plasma in: Clocks and Scientific Instruments
- 7
- 12
- 3 March 2025 at 09:13
  Circlip
- Slow Again? 1 2
  Started by: JasonB in: Website Questions, Comments, and Suggestions
- 23
- 50
- 3 March 2025 at 08:17
  SillyOldDuffer
- Always be careful
  Started by: Blue Heeler in: The Tea Room
- 2
- 2
- 3 March 2025 at 08:06
  Nealeb
- Strange German Lighter
  Started by: Vic in: The Tea Room
- 12
- 20
- 2 March 2025 at 21:21
  Fulmen
- Material to make studs – EN1A??
  Started by: flatline in: Materials
- 14
- 16
- 2 March 2025 at 19:24
  flatline
- Whistling TV
  Started by: Speedy Builder5 in: Electronics in the Workshop
- 5
- 7
- 2 March 2025 at 16:54
  Speedy Builder5

Viewing 25 topics - 1 through 25 (of 25 total)

View full reply list.

Latest Issue

March 2025

Buy Latest/Back Issues

Newsletter Sign-up

Latest Replies