College Workshop

Advert

College Workshop

Home Forums Workshop Tools and Tooling College Workshop

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #72095
    KWIL
    Participant
      @kwil
      Came across this one, a local college with proper machines!!
      Advert
      #16682
      KWIL
      Participant
        @kwil

        The new face of training?

        #72107
        JasonB
        Moderator
          @jasonb
          But are they allowed to use them
          #72206
          Robbo
          Participant
            @robbo
            They are obviously not used – look how clean it is! It’s a Cochester publicity shot “How it should be”.
            #72210
            Jeff Dayman
            Participant
              @jeffdayman43397
              No chuck key marks on the ceiling – I would say shop not in use yet!
               
              JD
               
              (no oily swarf,rags or hammer/wrench rash anywhere on the lathes either)
              #72212
              ady
              Participant
                @ady
                No oil or blood on the walls, no swarf bins, no oily rags, no bits of tooling lying about, no smears on the off-white lathe bed, no bar stock to be seen anywhere and everyone is standing around the expesso machine in the corner.
                 
                Must be British Leyland circa 1980.
                #72222
                KWIL
                Participant
                  @kwil

                  No it is Farnborough College 2010, part of £6 million new build.

                  #72279
                  Sub Mandrel
                  Participant
                    @submandrel
                    Look closer – its a virtual workshop for practicing CNC
                     
                    neil
                    #72288
                    Anonymous
                      Posted by KWIL on 21/07/2011 09:33:12:
                      No it is Farnborough College 2010, part of £6 million new build.
                       
                      Blimey, they’ve smartened the place up since my ignominious year of day release there!
                       
                      Regards,
                       
                      Andrew
                      #72293
                      Steve Garnett
                      Participant
                        @stevegarnett62550

                        I did a year at Farnborough too, back in the early 70’s. Thing is, that’s not any ordinary technical college, is it – it’s effectively a part of the RAE over the road, complete with tunnel under the main road into the RAE staff canteen (unless they’ve filled it in…). And it is still very much linked in with it. So it’s a ‘flagship’ college, according to the government, and therefore gets exceptional treatment. Shame most of the other colleges in the fleet it’s flagship of have been scuppered though, isn’t it?

                        #72460
                        KWIL
                        Participant
                          @kwil

                          RAE long gone, what is left at Farnborough is Quinetic (research company) on the rear site where the wind tunnels are and of course Britsh Aerospace.

                          #72464
                          Anonymous
                            Actually it’s Qinetiq; it’s RAE as was plus a few other goverment research establishments. And a load of sharp suits who think they can sell when all they can actually do is bullshit.
                             
                            We did a 30kW AC-DC bi-directional power converter for them a couple of years ago. There are still some pretty bright guys there, but also some real dodos. We visited a few times and the place has changed out of all recognition. All the old buildings on the north side gone, including the main canteen, and replaced by new flashy science park style buildings. The training centre where I was based was on the south side, next to the IAM. No doubt that has long gone too.
                             
                            Regards,
                             
                            Andrew
                            #72470
                            Steve Garnett
                            Participant
                              @stevegarnett62550

                              I’m not surprised that it’s all changed – everything does! And I haven’t been back there for donkey’s years, and obviously can only really remember it the way it was.

                            Viewing 13 posts - 1 through 13 (of 13 total)
                            • Please log in to reply to this topic. Registering is free and easy using the links on the menu at the top of this page.

                            Advert

                            Latest Replies

                            Viewing 25 topics - 1 through 25 (of 25 total)
                            Viewing 25 topics - 1 through 25 (of 25 total)

                            View full reply list.

                            Advert

                            Newsletter Sign-up