Classifieds – correcting a listing

[Roger JelbertParticipant @rogerjelbert74854]

[Roger JelbertParticipant @rogerjelbert74854]

I recently posted an item in Classified (unfinished clock) and made a mistake in the web link (I omitted .htm at the end of the address) I'm getting emails telling me the link doesn't work but I can't find any way to edit the posting to correct it..Is it possible ?

[EmgeeParticipant @emgee]

Roger, you could submit another advert by copying and pasting the corrected text into the new ad, then withdraw the first ad.

Emgee

[Michael GilliganParticipant @michaelgilligan61133]

No harm done, Roger

There's a working link on your previous thread:

http://www.model-engineer.co.uk/forums/postings.asp?th=135308

MichaelG.

.

P.S. it was good to re-visit your cHipp page

Edited By Michael Gilligan on 24/04/2018 10:40:07

[JasonBModerator @jasonb]

Should be OK now.

[Roger JelbertParticipant @rogerjelbert74854]

Thank you to moderator JasonB for fixing the link..
@ Emgee: There doesn't seem to be a way o f withdrawing"/deleting an old one either. nI fact, is it not a bit odd that the format of the classifieds is different from the general forum posts where an "edit" button shows in the tile bar and you can link (as I now know!) to an album.
@Michael – the cHipp toggle clock is still running perfectly and plans for a new, tidier, version are formulating..In the eBay purchase I recntly made I got a spare Gensign chassis, drive magnets and pendulum rod (like GPO 36 clock) and intend using them as the basis..Sadly I'm still not much of a mechanic
Rogerj.co.uk

[John RuddParticipant @johnrudd16576]

Roger,

If you log onto the site/forum, click onto the classifieds ads tab, you will see ' manage my ads' if you click it, it will allow you to delete/edit….or add new..

Edited By John Rudd on 24/04/2018 12:47:21

[Neil WyattModerator @neilwyatt]

As John says, just go to the classifieds page and click 'manage my ads'.

Neil

[Roger JelbertParticipant @rogerjelbert74854]

yes…Obvious when you know how ! I just didn't notice that..Thanks

[Author]

Posts