CJ18A Wiring

[james dyerParticipant @jamesdyer12508]

Hi all, apologies as the has probably been asked countless times before!

I've just come into possession of an Amadeal CJ18A mini lathe with wiring problems, I've had a look at the wiring diagram however it doesn't really make sense.

Does anybody happen to have any clear pictures of the inside of the control box showing which wires connect where, I've had a look at a couple on the site but they don't show great enough detail.

I'm awaiting with everything crossed hoping someone can help me, thanks in advance.

[james dyerParticipant @jamesdyer12508]

Wiring diagrams

[SillyOldDufferModerator @sillyoldduffer]

Welcome to the forum James. Sorry I don't have the lathe or a picture of the internal wiring but someone else might be along later.

Can you post a picture of what you have? Might be possible to work it out from that. How to post photos described here.

In the meantime, go to the forums HOME page (Black toolbar), and scroll down. About halfway there's a Google Site search box that works better than the forums own. Try putting CJ18A into that.

Dave

[Stuart Smith 5Participant @stuartsmith5]

James

I have one if these lathes.

I have put a few photos in my CJ18A album **LINK**

I have some more on my phone but am having difficulty trying to copy them. Let me know if you need them and I will have another go.

Stuart

[Stuart Smith 5Participant @stuartsmith5]

James

I don’t know if this is of any use, but I found this document on a KBIC drive circuit. It may be the same or similar to the one in your lathe.

**LINK**

Stuart

[Author]

Posts