Centre Cam

Advert

New Replies

Report Bug

Help/FAQs

Centre Cam

This topic has 15 replies, 8 voices, and was last updated 27 May 2014 at 11:06 by Ed Duffner.

Viewing 16 posts - 1 through 16 (of 16 total)

Author

Posts
30 June 2012 at 00:24 #16832
Ian Rusch
Participant
@ianrusch57126
Web Cam Software
Advert

30 June 2012 at 00:24 #93364
Ian Rusch
Participant
@ianrusch57126
Way back in 2007 I downloaded a demo version of this program and have used it ever since

I have tried to contact the author with no luck

Is there a full version available or another program for this purpose.

Ian Rusch

Australia
30 June 2012 at 06:50 #93373
Michael Gilligan
Participant
@michaelgilligan61133
Ian,

Is this what you are looking for?

MichaelG.
30 June 2012 at 08:54 #93378
Ian Rusch
Participant
@ianrusch57126
Hi Michael

yes but you can still not register the program

Thanks

Ian R
5 July 2012 at 23:58 #93772
Michael Gilligan
Participant
@michaelgilligan61133
Ian,

I see what you mean … his website doesn't appear to have been updated since 2008.

Not quite the same thing, but it may be worth having a look at this, as an alternative approach.

MichaelG.
21 October 2012 at 11:53 #101519
FMES
Participant
@fmes
Hi Ian,

I had been following Mike Treaths article as well, and had been using the old software quite happily until I upgraded to Windows 7 where it simply doesn't work.

I have tried to contact Mike with no success and have been looking for some alternative software.

There must be something within the CAD area that could be suitable, so I'm still looking.

Lofty
21 October 2012 at 17:05 #101553
dazz dazz
Participant
@dazzdazz87636
Hi Lofty

I have just downloaded the demo version of CentreCam and installed it on windows7 ,it works fine.

What error is it giving you ?

Regards

Inee
21 October 2012 at 18:28 #101557
FMES
Participant
@fmes
Hi Dazz,

I downloaded it a year or so ago, now when I put in my details to download it again it says already registered

Like Ian, I wanted to register the software as the demo wouldn't allow the crosshairs to be displayed.

I was hoping Mike would have released version 2 by now.

Lofty
14 November 2012 at 18:36 #103698
Michael Gilligan
Participant
@michaelgilligan61133
Ian [and all],

Given the difficulty with CentreCam

This might be useful.

MichaelG.
8 January 2013 at 19:07 #108229
Peter Spink
Participant
@peterspink21088
Does any one know what's happened to Mike Trethewey? I too would like to register but no response even though emails are not 'bouncing back'. None of the other software available seems to fit the bill.

PeterS
10 January 2013 at 06:32 #108348
Johan Crous
Participant
@johancrous15881
Is this an alternative to DRO on a milling machine?
10 January 2013 at 06:55 #108349
Ian Rusch
Participant
@ianrusch57126
Hi Johan

NO this is not a replacment for a DRO

it is used for finding a starting point ie the edge or a scribe line etc.

regards

Ian Rusch
27 May 2014 at 09:58 #153671
Michael Gilligan
Participant
@michaelgilligan61133
I am resurrecting this old thread because I just found this camera with crosshairs listed on ebay. … Anyone who wants a simple system [i.e. no PC, just a direct connection from camera to monitor] might find it of interest.

… Plenty of suitable flat-screen monitors appearing at the car-boot sales

MichaelG.
27 May 2014 at 10:44 #153675
Ady1
Participant
@ady1
There's still a download link here If anyone wants it
27 May 2014 at 10:52 #153678
Michael Gilligan
Participant
@michaelgilligan61133
[see my previous post] … This one is £5 cheaper

Edit: but it only mentions "cursor" so I'm not sure if it's exactly the same model.

MichaelG.

Edited By Michael Gilligan on 27/05/2014 11:05:22
27 May 2014 at 11:06 #153680
Ed Duffner
Participant
@edduffner79357
Out of curiosity I just downloaded and installed Centre Cam on Windows 7 x64 and it appears to work with my web cam, Logitech Quickcam Sphere AF. It gave an error during installation about registering a DLL but I chose the "Ignore" button in the dialogue box.
Author

Posts